I have a '96 block and head 4.7 litre stroker I am going to install a '99 intake in an '87 Jeep Comanche. I need to know what header will fit. I would like a 2.5" collector and stainless steel.
Help please, exhaustive research with no difinitive results.
'99 intake stroker header suggestions
-
knever3
- Learning to use the board
- Posts: 37
- Joined: April 6th, 2012, 3:34 pm
- Stroker Displacement: 4.7L
- Vehicle Year: 1987
- Vehicle Make: Jeep
- Vehicle Model: Comanche
-
UncleWally
- Noob
- Posts: 15
- Joined: May 16th, 2009, 12:02 pm
- Vehicle Year: 1984
- Vehicle Make: Jeep
- Vehicle Model: CJ7
- Location: Howard Lake, MN
Re: '99 intake stroker header suggestions
You can always build your own if you have some fabrication skills. Do a google search on Headers by Ed. He has a lot of design information that is good to know. I have built headers for a couple of different vehicles and have been more than satisfied by following his recommendations.
Brian
Brian
-
gmakra
- I think I'll order a "tab"
- Posts: 48
- Joined: July 21st, 2008, 10:02 am
- Stroker Displacement: 4.7
Re: '99 intake stroker header suggestions
The Gale Banks Revolver will work. Its a redesigned 4.0 header with a 2 1/2 collector and will work with any 4.0 intake including the 2000+ manifolds
-
CobraMarty
- BANNED
- Posts: 297
- Joined: December 3rd, 2011, 2:01 am
- Vehicle Year: 1998
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
Re: '99 intake stroker header suggestions
I have a Banks Revolver header, never installed. Are you interested? $350 shipped.
1998 XJ 2D AW4 32"MTR 3.55 4.5"RC JCR Slider Magnaflow 150rwHP/174rwTQ=> Sprintex SC Gibson Header 6lb 120-140*IAT 211rwHP/274rwTQ WasherFluid Inj 70mmTB 7.5lb 100-120*IAT=>Now 12 pounds Boost=> +BV ported head
99 XJ M62 S/C
99 XJ M62 S/C
-
knever3
- Learning to use the board
- Posts: 37
- Joined: April 6th, 2012, 3:34 pm
- Stroker Displacement: 4.7L
- Vehicle Year: 1987
- Vehicle Make: Jeep
- Vehicle Model: Comanche
Re: '99 intake stroker header suggestions
I picked up an aFe performance header and it fits perfect! I tried to reply to this thread since then and it kept giving me errors. Thanks for the replies guys.
Who is online
Users browsing this forum: Ahrefs [Bot], Semrush [Bot] and 6 guests