Preferred oil filter?

Newbies, and basic Stroker Recipes... Get started with your first stroker here!!
User avatar
IH 392
I love JeepStrokers.com!!
I love JeepStrokers.com!!
Posts: 725
Joined: October 4th, 2008, 11:15 am
Location: Eugene ORYGUN
Contact:

Re:

Post by IH 392 »

Mgardiner1 wrote:Quick question on the picture posted above.... Is that your stock filter configuration?
100% stock, I ordered the Jeep and it had 3 miles on it when I took possession.
You can get more power out of ANY engine!!!
ASE Master certified engine machinist, gas and diesel
User avatar
Comanche91
Donator
Donator
Posts: 156
Joined: February 13th, 2008, 4:51 pm
Stroker Displacement: 4.6L
Vehicle Year: 1991
Vehicle Make: JeeP
Vehicle Model: Comanche
Location: Sweet Home Alabama

Re: Preferred oil filter?

Post by Comanche91 »

IH 392 wrote:The Purolator PL14670 is about 3 1/5" tall and it's physically touching the wire loom as it sits, and it's right in line with the center of the filter, where are you going to put a taller filter in there???
Different configuration on my 91.

Image
91 Comanche LWB, AW4, Hesco 4.6L, D44 Trac-lok, CHROME freak, ROLL TIDE
bratcop
Making Progress
Making Progress
Posts: 88
Joined: October 14th, 2008, 8:45 pm
Stroker Displacement: 4.5L
Location: Sheboygan, WI

Re: Preferred oil filter?

Post by bratcop »

Not sure on the p/n but I love the Purolator Pure One. When I finish my Stroker, that is what I will use. My machinist says WIX has always been very good as well. I use the same filter (pure one) on my Yamaha FJR, my Honda 03 Accord Coupe and my 06 F150. Read quite a bit about it while researching for the bike. It is highly recommended for it's filter ability...my .02.

Bratcop
2001 GC Laredo
4.5 Stroker, 9.6 SCR, 8.1 DCR
Stock Valvetrain
24# Cobra Injectors
Bored Throttle Body
CAI
Ported and Polished 0331 Head
SplitSecond PSC1-003 Piggyback
Zeitroniz WideBand O2 logger
(all of this is still in the works as we speak)
User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1505
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Oregon
Contact:

Re: Preferred oil filter?

Post by Muad'Dib »

gradon wrote:Mobil 1 301.
Thats what i use, but the last time i was in to get one, the parts store (Schucks aka Kragen, Checker, Murrays etc) said that M1 is no longer making this filter anymore. They sold me their last 2 they had in stock for the price of 1.

Has anyone heard anything similiar?
If it feels right, then STROKE it!
User avatar
gonridnu
Movin on up ^
Movin on up ^
Posts: 332
Joined: December 22nd, 2008, 9:36 am
Stroker Displacement: 4.6L
Vehicle Year: 1989
Vehicle Make: Jeep
Vehicle Model: XJ 2 door

Re: Preferred oil filter?

Post by gonridnu »

I use Napa golds on everything (as said before made by wix) except the Cummins 'cause I get the factory filter cheap from Mopar. Haven't ever looked into the longer one but I will now. Rule of thumb...use good quality filters and good oil and change it often:)
Post Reply

Who is online

Users browsing this forum: Google [Bot], Semrush [Bot] and 3 guests