Go ahead...point you're finger and laugh

Performance mods and Advanced Stroker discussion.
Post Reply
amceaglesx4
Movin on up ^
Movin on up ^
Posts: 324
Joined: December 5th, 2015, 5:26 pm
Vehicle Year: 1981
Vehicle Make: amc
Vehicle Model: eaglesx4

Go ahead...point you're finger and laugh

Post by amceaglesx4 »

My can might be shot. I did my initial break in light revs and short trips with oil system primed and can all lubed up. 1st oil change bad lifter tick when cold and seems to get better as it warms up. Stupid me put in old lifters. Go ahead and laugh I wasn't thinking. What an idiot !!! Go on... If anyone gives a crap and would like to help here's what's going on...

Louder when cold
Cruising speed you hear it
Any acceleration it goes away
Any deceleration it goes away
Idles and starts like a champ
No missing or loss of power

Or just laugh
User avatar
Cheromaniac
I live here
I live here
Posts: 3258
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: Go ahead...point you're finger and laugh

Post by Cheromaniac »

I think you already know what you're going to find; cupped lifters and worn cam lobes 'cause you made the mistake of using old lifters on a new cam.
New lifters on an old cam is OK but not the reverse.
Sorry to hear about your troubles and hope you get the engine sorted quickly.
1992 XJ 4.6 I6 - 5MT - Stroker build-up, Stroker "recipes" Sold
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car :lol:
amceaglesx4
Movin on up ^
Movin on up ^
Posts: 324
Joined: December 5th, 2015, 5:26 pm
Vehicle Year: 1981
Vehicle Make: amc
Vehicle Model: eaglesx4

Re: Go ahead...point you're finger and laugh

Post by amceaglesx4 »

Thank you. Since there is less than 60 miles on it and I haven't even hit 4000rpms on it yet hopefully the lifter swap solves it. I hope
Russ Pottenger
Strong Poster
Strong Poster
Posts: 922
Joined: August 15th, 2009, 1:27 am
Stroker Displacement: 4.7
Vehicle Year: 2000
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: Go ahead...point you're finger and laugh

Post by Russ Pottenger »

Dino is absolutely correct.

At the very least when you pull your lifters out check the bottom of the lifters with a Percision straight edge. Hold it up to a light.
The lifters should have a slight crown. If any of them don't, plan on doing a lifter and camshaft change.
amceaglesx4
Movin on up ^
Movin on up ^
Posts: 324
Joined: December 5th, 2015, 5:26 pm
Vehicle Year: 1981
Vehicle Make: amc
Vehicle Model: eaglesx4

Re: Go ahead...point you're finger and laugh

Post by amceaglesx4 »

Well I'll find out Wednesday when I pull the head. Hopefully the lifters just took a shit with a higher lift camshaft. If they don't have a slight crown is dead flat okay ? Obviously if they are caved in I got problems. Thanks Russ , didn't want to directly contact about this and take time out of your work day.
amceaglesx4
Movin on up ^
Movin on up ^
Posts: 324
Joined: December 5th, 2015, 5:26 pm
Vehicle Year: 1981
Vehicle Make: amc
Vehicle Model: eaglesx4

Re: Go ahead...point you're finger and laugh

Post by amceaglesx4 »

Shit keeps getting better... just shattered my left wrist a few hours ago playing with my son. Great !
johnj92131
Making Progress
Making Progress
Posts: 57
Joined: June 26th, 2008, 9:52 pm

Re: Go ahead...point you're finger and laugh

Post by johnj92131 »

amceaglesx4 wrote:Shit keeps getting better... just shattered my left wrist a few hours ago playing with my son. Great !
Darn, what luck. Now, please take the instructions of your doctor to heart. Do as he/she tells you! On the bright side - most of us are right handed. Hope that is the case with you.
User avatar
Cheromaniac
I live here
I live here
Posts: 3258
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: Go ahead...point you're finger and laugh

Post by Cheromaniac »

amceaglesx4 wrote:Shit keeps getting better... just shattered my left wrist a few hours ago playing with my son. Great !
Sorry to hear that. Hope the left isn't your dominant side so you can still do most tasks with the right hand.
Looks like you'll need a helper to be your left hand while you're working on the Jeep so have some beer & pizza ready.
jeepxj3
Movin on up ^
Movin on up ^
Posts: 370
Joined: December 5th, 2013, 1:55 am
Stroker Displacement: 4.6
Vehicle Year: 1998
Vehicle Make: jeep
Vehicle Model: xj

Re: Go ahead...point you're finger and laugh

Post by jeepxj3 »

That will be interesting, a 'one armed jeep head puller' to change out the lifters. Please post you tube video.
Broken bones only take 6 weeks or 42 days, to heal. 1 down, 41 days to go.
amceaglesx4
Movin on up ^
Movin on up ^
Posts: 324
Joined: December 5th, 2015, 5:26 pm
Vehicle Year: 1981
Vehicle Make: amc
Vehicle Model: eaglesx4

Re: Go ahead...point you're finger and laugh

Post by amceaglesx4 »

Lmfao. This really sucks hardcore. I'm the type that would try anyways. In the way of holding a beer that's what the beer hats are for lmao. Right handed and have to paint, got a family to provide for. As of now all I can do it look under the hood and sigh
User avatar
Cheromaniac
I live here
I live here
Posts: 3258
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: Go ahead...point you're finger and laugh

Post by Cheromaniac »

amceaglesx4 wrote:Lmfao. This really sucks hardcore. I'm the type that would try anyways. In the way of holding a beer that's what the beer hats are for lmao. Right handed and have to paint, got a family to provide for. As of now all I can do it look under the hood and sigh
Could have been worse. I'm also right-handed and I fractured my right wrist 15 years ago playing soccer, so I very quickly had to learn to write with my left hand for the first two weeks until I could be fitted with a lighter cast.
Post Reply

Who is online

Users browsing this forum: Semrush [Bot] and 1 guest