Stumble when cold
-
- Noob
- Posts: 19
- Joined: January 11th, 2014, 10:21 pm
- Vehicle Year: 1998
- Vehicle Make: jeep
- Vehicle Model: cherokee
Re: Stumble when cold
Runs a lot better now with the new injectors . Next question I have is I put a accel coil in should my plugs be gapped bigger than stock seems like I am getting a knock under load that wasn't there before coil ?
-
- Movin on up ^
- Posts: 370
- Joined: December 5th, 2013, 1:55 am
- Stroker Displacement: 4.6
- Vehicle Year: 1998
- Vehicle Make: jeep
- Vehicle Model: xj
Re: Stumble when cold
That seems weird to get 'knock' with just a coil change. I would retry the stock coil and see if the knock goes away.
If I gap bigger than stock it seems to run worse and stumble.
If I gap bigger than stock it seems to run worse and stumble.
- SilverXJ
- Global Moderator
- Posts: 5790
- Joined: February 14th, 2008, 7:14 am
- Stroker Displacement: 4.6L
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Radford, Va
Re: Stumble when cold
Knock or ping?
I to would put the stock back in and see if it is still there. Then try the accel again and possibly reset the PCM.
I to would put the stock back in and see if it is still there. Then try the accel again and possibly reset the PCM.
2000 XJ. 4.6L stroker
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
-
- Noob
- Posts: 19
- Joined: January 11th, 2014, 10:21 pm
- Vehicle Year: 1998
- Vehicle Make: jeep
- Vehicle Model: cherokee
Re: Stumble when cold
Ping mostly underpaid .uphill or rite before a downshift . Will try it this weekend . Trying to work out all the bugs on jeep . Seems like one clears another starts . Guess its that jeep thing
Who is online
Users browsing this forum: No registered users and 6 guests