
won`t rev over 2000rpm`s
-
- Posts: 5
- Joined: September 30th, 2013, 7:37 am
- Stroker Displacement: 4.9
- Vehicle Year: 1992
- Vehicle Make: jeep
- Vehicle Model: wrangler
won`t rev over 2000rpm`s
I have a 4.9stroker w/700r4 going in 92 yj it has 04 intake ,3.5 lhs fuel reg.,27pound inj.,k&n ,cps relocator(avance adapters) idles great & runs great up to 2000rpms(seems to hit rev limiter) no codes on computer 49psi on fuel rail any ideas? thanks for any help 

- Cheromaniac
- I live here
- Posts: 3255
- Joined: March 8th, 2008, 12:58 pm
- Stroker Displacement: 4563cc
- Vehicle Year: 1992
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Cyprus
- Contact:
Re: won`t rev over 2000rpm`s
Possibly a plugged up cat. Bang on it with your fist and if it rattles like a can of marbles, replace it.rocket1 wrote:any ideas?
1992 XJ 4.6 I6 - 5MT - Stroker build-up, Stroker "recipes" Sold
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car

-
- Posts: 5
- Joined: September 30th, 2013, 7:37 am
- Stroker Displacement: 4.9
- Vehicle Year: 1992
- Vehicle Make: jeep
- Vehicle Model: wrangler
Re: won`t rev over 2000rpm`s
no cat
-
- Making Progress
- Posts: 76
- Joined: October 11th, 2009, 8:04 pm
- Vehicle Year: 1989
- Vehicle Make: jeep
- Vehicle Model: comanche
- Location: dyess afb texas
Re: won`t rev over 2000rpm`s
Check your gap between crank sensor and wheel. Could be losing the signal at that rpm if it's not close enough. Also is this Just free reving or driving. Or both
boosted Comanche on megasquirt, 8.90"s in the 1/8th. getting faster one step at a time!!
-
- Posts: 5
- Joined: September 30th, 2013, 7:37 am
- Stroker Displacement: 4.9
- Vehicle Year: 1992
- Vehicle Make: jeep
- Vehicle Model: wrangler
Re: won`t rev over 2000rpm`s
@turbo its doing it both driving & not .avance adapters said you can gap with a credit card so thats how I did it but thats one of my first thoughts just won`t have time to pull tranny til the weekend plus I was hoping that isn`t it.does the wheel /marks need to be shined up to read it was a junk yard find? thanks
-
- Posts: 5
- Joined: September 30th, 2013, 7:37 am
- Stroker Displacement: 4.9
- Vehicle Year: 1992
- Vehicle Make: jeep
- Vehicle Model: wrangler
Re: won`t rev over 2000rpm`s
computer was the problem. thanks
Who is online
Users browsing this forum: No registered users and 2 guests