I have searched but not located a good explanation of this:
Why does my TPS% on the scanner show 16.7% at idle and only 77.8% at WOT?
Using a MOPAR sensor, TV(trans cable) is not restricting my throttle any, and linkage has full throttle range.
TPS % on Scanner
-
superstingray77
- I made it to triple digits!
- Posts: 141
- Joined: February 28th, 2012, 6:31 pm
- Stroker Displacement: 4.7
- Vehicle Year: 1999
- Vehicle Make: jeep
- Vehicle Model: WJ
-
Cheromaniac
- I live here
- Posts: 3241
- Joined: March 8th, 2008, 12:58 pm
- Stroker Displacement: 4563cc
- Vehicle Year: 1992
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Cyprus
- Contact:
Re: TPS % on Scanner
When you consider that a TPS of 100% is the reference voltage of ~5v, your idle TPS is ~0.83v and WOT is ~3.89v and those are right on the money.
1992 XJ 4.6 I6 - 5MT - Stroker build-up, Stroker "recipes" Sold
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car
-
CobraMarty
- BANNED
- Posts: 297
- Joined: December 3rd, 2011, 2:01 am
- Vehicle Year: 1998
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
Re: TPS % on Scanner
Mine reads 14.7% at idle.
1998 XJ 2D AW4 32"MTR 3.55 4.5"RC JCR Slider Magnaflow 150rwHP/174rwTQ=> Sprintex SC Gibson Header 6lb 120-140*IAT 211rwHP/274rwTQ WasherFluid Inj 70mmTB 7.5lb 100-120*IAT=>Now 12 pounds Boost=> +BV ported head
99 XJ M62 S/C
99 XJ M62 S/C
-
superstingray77
- I made it to triple digits!
- Posts: 141
- Joined: February 28th, 2012, 6:31 pm
- Stroker Displacement: 4.7
- Vehicle Year: 1999
- Vehicle Make: jeep
- Vehicle Model: WJ
Re: TPS % on Scanner
Perfect, 505 performance tried to tell me that the idle should read 0%. Just didnt sound correct to me as I was following the same logic as you guys.
Who is online
Users browsing this forum: Amazon [Bot] and 7 guests