Valve cover?

Post by **haroldpo6** » July 24th, 2012, 12:14 pm

Will a 1996 4.0 valve cover fit on a 1995 4.0?

Post by **cruiser54** » July 24th, 2012, 7:18 pm

Yes, it will.

Post by **haroldpo6** » July 25th, 2012, 4:19 am

I noticed when looking at valve cover gaskets they list 96 and up, not for a 95?

Post by **haroldpo6** » July 25th, 2012, 7:24 am

Also the head for the 95 is 7120
The head for the 96 is 0630

but will the cover interchange?

anybody

Post by **SilverXJ** » July 25th, 2012, 5:39 pm

Head doesn't matter as far as valve cover fit is concerned. The later steel valve cover will fit on earlier heads. The only thing that changes are the PCV elbows and grommets.

Post by **haroldpo6** » July 25th, 2012, 6:27 pm

SilverXJ wrote:Head doesn't matter as far as valve cover fit is concerned. The later steel valve cover will fit on earlier heads. The only thing that changes are the PCV elbows and grommets.

Thanks

Post by **haroldpo6** » July 27th, 2012, 5:53 pm

SilverXJ wrote:Head doesn't matter as far as valve cover fit is concerned. The later steel valve cover will fit on earlier heads. The only thing that changes are the PCV elbows and grommets.

Just finished installing, fits like a glove.

Post by **woodjeep** » July 28th, 2012, 6:34 pm

The stamped steel 96 and up will fit all years because the bottom is flat...the 95 and down cast alluminum will not due to the ridge on the bottom. I ground down my ridge so the bottom was flat so my 92 cover fit my 96 head.

Post by **Muad'Dib** » July 29th, 2012, 9:02 pm

Yeah... i used a VC from a 2000 on my 90 RENIX. Just had to change out my CCV stuff (which is a good idea anyway).

Valve cover?

Valve cover?

Re: Valve cover?

Re: Valve cover?

Re: Valve cover?

Re: Valve cover?

Re: Valve cover?

Re: Valve cover?

Re: Valve cover?

Re: Valve cover?

Who is online