It's ALIVE !!! Again!! with VIDEO

[Bike Guy]

I think I finally figured out all the fuel issues (the right injectors, H.P. Fuel pump, adj. regulator, fuel filter, the list went on and on ).

Check out the video, let me know what you think.
I think it's finally time to Dyno!!

Turn up the Volume!
http://www.youtube.com/watch?v=ujMUtExiYxU


.

[1992Rotbox]

Sounds mean, love the polished VC
What size tires are you running for the dyno test?

[Bike Guy]

Sounds mean, love the polished VC - Thanks, I cut the fins off with a Port-a-band and started sanding. Four hours later it was time to start polishing!!

What size tires are you running for the dyno test? - My street tires = 33x12.5x15 BFG A/T's (beats the heck out of trying to get descent #'s with my 110# each 35" Maxxis C/C on Trail-Ready HD B/L's wheels

[Bike Guy]

I've had a handful of people ask about the spec's on the motor, so I thought I'd post them here with the Video!

Motor: Magnum I-6

Head Mods = Port matched & polish, Enlarge Valve bowls & polish, Mill down Head, Flow Benched - results (25% increase in flow) Work By SCH RACING HEADS , Mopar Performance Ultra Thin multi-layer Head Gasket (to boost compression) - results (140-150 PSI)

Valve Train Mods = Mopar Performance Stage II Cam, Mopar Performance HD rocker-arm assembly, Trend custom push-rods, Crowler cam-saver lifters, Coyles Double Roller Chain & Gears, R&D Off-Road Custom valve cover

Oiling Mods = Hesco Blue-Printed High Volume oil pump w/dist. lube-tube & H.V. pick up, Trans-Dapt oil filter Remote relocation System, AMSOIL high zinc synthetic oil with a over sized NanoFiber Filter

Cooling System Mods = FlowKooler High-Flow water pump, Hesco H.F. water inlet housing, Milodon H.F. 195 deg. Thermostat, Performance Radiator - 3 core CBR all metal Radiator, Flex-a-lite HD Fan Clutch, Flex-a-lite 6-blade Clutch Fan, Jegs
sealed recirculating overflow Tank

Air Mods = Banks Ram-Air intake system (97-06), BBK 62mm Performance-Power-Plus series Throttle body, Custom 62mm throttle Spacer, '2000' Intake Manifold w/Polished runners

Fuel Mods = R&D Off-Road custom injector harness, Bosch 4-hole 20# (Black Jack) H.P. injectors, Hesco adjustable High Pressure fuel regulator 46 psi - results brings the injectors up to 22# (stock system is 19# at 39psi), Walbro 255LPH High Performance fuel Pump, GenRight Crawler Extreme 17 gal. aluminum fuel Tank

Ignition Mods = Sreamin' Demon Coil, 10mm Livewires spark-plug wires, Fire Power Distributor & Rotor cap, E3 spark Plugs

Exhaust Mods = Borla T-304 Stainless Header (1998-99), with S/S 2 1/2" head pipe, MagnaFlow H.F. Cat., Custom Cat.-back 2 1/2" exhaust w/Performance Brand H.F. muffler

Engine Restraints = Brown Dog 1" Poly Motor mounts and Brown Dog Super engine brackets (15 bolts total to hold the Beast in)