Newbies, and basic Stroker Recipes... Get started with your first stroker here!!
the_wrench116
Donator
Posts: 124Joined: April 25th, 2009, 3:59 pm
Post
by the_wrench116 July 5th, 2009, 1:18 pm
hey i have a 91 block a 12cw crank and a set of 4.0L rods a 68-232-4 comp cams bump stick and a 91 head assembled main and rod bearings.
still need lifters, timing set, injectors,head gasket, ARP studs, pistons ( dish size? looking to run 9.5:1+-.25 static)
what do i need to get this thing together did i miss any thing?????
i know i will need to have my block bored at least .030 may be .060 as the #1 top piston ring broke and wore a BIG grove in the bore.
92 XJ 4D custom borla header 3" exhaust flowmaster 50series muffler.
Plechtan
Donator
Posts: 667Joined: August 28th, 2008, 9:00 amStroker Displacement: 5.0L 4x4Vehicle Year: 1988Vehicle Make: JeepVehicle Model: ComancheLocation: Woodstock, IL
Contact:
Post
by Plechtan July 5th, 2009, 3:42 pm
91 head? That's not an HO is it? I would see if you could get a later head and intake. look at the recipies and FAQ to see where to go. If you look through all of tha and still have questions people on the forum will be happy to answer them.
Peter Lechtanski
Muad'Dib
Site Admin / Owner
Posts: 1505Joined: January 8th, 2008, 10:55 amStroker Displacement: 4.7LVehicle Year: 1990Vehicle Make: JeepVehicle Model: CherokeeLocation: Oregon
Contact:
Post
by Muad'Dib July 5th, 2009, 4:06 pm
91-95 is HO. Casting # 7120.
If it feels right, then STROKE it!
the_wrench116
Donator
Posts: 124Joined: April 25th, 2009, 3:59 pm
Post
by the_wrench116 July 5th, 2009, 4:23 pm
yes its a HO head and block sorry didnt think to mention it
92 XJ 4D custom borla header 3" exhaust flowmaster 50series muffler.
ajmorell
Donator
Posts: 81Joined: March 16th, 2009, 11:49 amVehicle Year: 1998Vehicle Make: JeepVehicle Model: ZJLocation: Houghton, MI
Post
by ajmorell July 5th, 2009, 5:31 pm
With the 4.0 rods you are looking at expensive forged pistons, KB's or Hesco's most likely.
-Andy-Michigan Tech
the_wrench116
Donator
Posts: 124Joined: April 25th, 2009, 3:59 pm
Post
by the_wrench116 July 6th, 2009, 9:41 pm
are they the only ones readily available? and are they reliable? how many of you have them an have put 75k+ miles on them.
92 XJ 4D custom borla header 3" exhaust flowmaster 50series muffler.
ajmorell
Donator
Posts: 81Joined: March 16th, 2009, 11:49 amVehicle Year: 1998Vehicle Make: JeepVehicle Model: ZJLocation: Houghton, MI
Post
by ajmorell July 7th, 2009, 5:28 pm
the_wrench116 wrote: are they the only ones readily available? and are they reliable? how many of you have them an have put 75k+ miles on them.
AFAIK the only pistons available for use with the 4.0 rods are forged. Aside from being a bit noisy at startup forged pistons are significantly better than cast IMO.
-Andy-Michigan Tech
the_wrench116
Donator
Posts: 124Joined: April 25th, 2009, 3:59 pm
Post
by the_wrench116 July 7th, 2009, 6:43 pm
AFAIK??? whats this mean?
need forged pistons to run boost
92 XJ 4D custom borla header 3" exhaust flowmaster 50series muffler.
Flash
I love JeepStrokers.com!!
Posts: 693Joined: February 17th, 2008, 10:45 pm
Post
by Flash July 7th, 2009, 9:56 pm
the_wrench116 wrote: AFAIK??? whats this mean?
need forged pistons to run boost
As Far As I Know =AFAIK
89 XJ with 300,000 on the original eng
the_wrench116
Donator
Posts: 124Joined: April 25th, 2009, 3:59 pm
Post
by the_wrench116 July 8th, 2009, 8:55 pm
got an octopus manifold(99+) complete. from flebay 150 shipped did i do good?
92 XJ 4D custom borla header 3" exhaust flowmaster 50series muffler.
gradon
Donator
Posts: 1353Joined: February 13th, 2008, 5:33 pmStroker Displacement: 4.6/280ciVehicle Year: 1996Vehicle Make: JeepVehicle Model: CherokeeLocation: DC
Post
by gradon July 8th, 2009, 9:41 pm
I can get them bare for $25.47+tax at my local JY, probably 90-100 w/ tb and fuel rail. $75-100 seems to be the norm on the forums and on ebay.
Users browsing this forum: Ahrefs [Bot] , Google [Bot] , Semrush [Bot] and 4 guests
