Jeep Strokers

Anyone know or have any experience with a 2.5 stroker? I've got a sick 2.5 in my TJ and figure if I'm going to yank it for a possible bad head gasket and get it cleaned up at the machine shop. I might as well build alittle more into it. I see that 505 makes a kit for it.

I'm also curious if there is an off the shelf crank that will stroke a 2.5.

dagr8tim wrote:I'm also curious if there is an off the shelf crank that will stroke a 2.5.

In a word, no.
That said you could still extract quite a bit of power out of the 2.5 with a cold air intake, 4.0L I6 throttle body, ported head, performance cam, and 2.25" full length exhaust.