Anyone know or have any experience with a 2.5 stroker? I've got a sick 2.5 in my TJ and figure if I'm going to yank it for a possible bad head gasket and get it cleaned up at the machine shop. I might as well build alittle more into it. I see that 505 makes a kit for it.
I'm also curious if there is an off the shelf crank that will stroke a 2.5.
2.5 Strokers
-
dagr8tim
- Noob
- Posts: 11
- Joined: August 24th, 2009, 9:59 am
- Vehicle Year: 1997
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
-
Cheromaniac
- I live here
- Posts: 3291
- Joined: March 8th, 2008, 12:58 pm
- Stroker Displacement: 4563cc
- Vehicle Year: 1992
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Cyprus
Re: 2.5 Strokers
In a word, no.dagr8tim wrote:I'm also curious if there is an off the shelf crank that will stroke a 2.5.
That said you could still extract quite a bit of power out of the 2.5 with a cold air intake, 4.0L I6 throttle body, ported head, performance cam, and 2.25" full length exhaust.
1992 XJ 4.6L Poor Man's Stroker - 5MT - 246hp & 311lbft (crank) - Sold 
Stroker Build Stroker Recipes
Stroker Build Stroker Recipes