Jeep Strokers

So in doing my research for my eventual stroker build I have been reading a lot about ECUs and the various roads people have taken. I found that JET Performance has a custom chip program. Below is the website that has the form for their custom chip program. The form is goes pretty in-depth about engine specs and various add ons. I emailed JET with a question about custom stroker chips and prices, I will post what they say when I get a reply. If anyone else has gone down this road or has experience with it, please speak up, otherwise this looks like it could be a good way to get a custom tuned stroker without the hassle of putting it on a dyno.

http://www.jetchip.com/Custom_Chip_Specs.asp

There are companies that can do a better job by tuning the PCM itself. All a Jet chip does it either changes the inpura or the outputs, not the actual program. Similar to a piggy back.

AGM114 wrote: otherwise this looks like it could be a good way to get a custom tuned stroker without the hassle of putting it on a dyno.

If you want that level of tune, that is pretty much the only way to do it.. or road tune. No out of the box chip will get that close.

Got a response from Jet Performance earlier today, here is what they said:

"Unfortunately, we can not do custom tuning on 1996 and up Jeep/Chrysler. You will want to contact a Dodge dealership to see if they still offer a Mopar Performance PCM for your Jeep."

That puts that to rest.

If you want a custom tuned PCM get in touch with this guy: [email protected]. He can do a whole lot more than fuel and timing.