Jeep Strokers

Hi
In Titan´s website says:
OE Jeep 4.2 3.895" stroker crankshaft. Precision ground, oil holes champer, and micro polished.
OE Jeep 4.2 rods 6.125" Rods have beed mag tested, reconditioned.
Silvolite #3241HC Hypereutectic pistons . The CR is 9.6:1. The pin height is 1.592. Quench Height 0.041"
It is possible tha caombination?
The link is http://www.titanengines.com/index.php?m ... s_id=15750

The OE 4.2 rods are 5.785" long, so that is a typo on Titan's part.
The OE 4.0 rods are 6.123" long and can not be used with those Silvolite 3241hc pistons in a stroker combo.