Hi
In Titan´s website says:
OE Jeep 4.2 3.895" stroker crankshaft. Precision ground, oil holes champer, and micro polished.
OE Jeep 4.2 rods 6.125" Rods have beed mag tested, reconditioned.
Silvolite #3241HC Hypereutectic pistons . The CR is 9.6:1. The pin height is 1.592. Quench Height 0.041"
It is possible tha caombination?
The link is http://www.titanengines.com/index.php?m ... s_id=15750
Rods and pistons combination
-
montelibre
- I made it to triple digits!
- Posts: 102
- Joined: November 19th, 2010, 8:22 am
- Stroker Displacement: 4.6
- Vehicle Year: 1997
- Vehicle Make: jeep
- Vehicle Model: Cherokee
- Location: Spain
-
gradon
- Donator
- Posts: 1353
- Joined: February 13th, 2008, 5:33 pm
- Stroker Displacement: 4.6/280ci
- Vehicle Year: 1996
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: DC
Re: Rods and pistons combination
The OE 4.2 rods are 5.785" long, so that is a typo on Titan's part.
The OE 4.0 rods are 6.123" long and can not be used with those Silvolite 3241hc pistons in a stroker combo.
The OE 4.0 rods are 6.123" long and can not be used with those Silvolite 3241hc pistons in a stroker combo.
Who is online
Users browsing this forum: No registered users and 12 guests