Need new injectors help

Newbies, and basic Stroker Recipes... Get started with your first stroker here!!
LetchcoreCJ7
Learning to use the board
Learning to use the board
Posts: 32
Joined: December 5th, 2009, 7:36 pm
Vehicle Year: 1983
Vehicle Make: Jeep
Vehicle Model: CJ7

Need new injectors help

Post by LetchcoreCJ7 »

Can someone point me to the right 24lb injectors for my 1991 4.6L Stroker. Below are some I found......

http://cgi.ebay.com/ebaymotors/ws/eBayI ... OTORS:1123

http://cgi.ebay.com/ebaymotors/ws/eBayI ... AUS%3A1123

http://cgi.ebay.com/ebaymotors/ws/eBayI ... AUS%3A1123

Are any of these correct????? :doh:

Thanks
1983' Jeep CJ7 w/ 4.6L stroker, NSG370 6 speed trans, D300.

91' 4.0L engine, 0.030 over, 4.0L rods, 4.2L crank, KB944 pistons, Stock head w/ Mopar springs, Mopar cam, Mopar roller timing chain, Mopar oil pump, Hesco CPS relo kit, SS header
Top
User avatar
Cheromaniac
I live here
I live here
Posts: 3290
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus

Re: Need new injectors help

Post by Cheromaniac »

All three sets are correct but I'd go for either one of the first two.
1992 XJ 4.6 I6 Stroker - 5MT - 200rwhp 258rwtq - Sold :cry:
Top
LetchcoreCJ7
Learning to use the board
Learning to use the board
Posts: 32
Joined: December 5th, 2009, 7:36 pm
Vehicle Year: 1983
Vehicle Make: Jeep
Vehicle Model: CJ7

Re: Need new injectors help

Post by LetchcoreCJ7 »

Ordered up the second ones. They are new and at a good price for 8 of them! :cheers:
1983' Jeep CJ7 w/ 4.6L stroker, NSG370 6 speed trans, D300.

91' 4.0L engine, 0.030 over, 4.0L rods, 4.2L crank, KB944 pistons, Stock head w/ Mopar springs, Mopar cam, Mopar roller timing chain, Mopar oil pump, Hesco CPS relo kit, SS header
Top

Return to “Stroker Basics”