Injector FAQ Information

Newbies, and basic Stroker Recipes... Get started with your first stroker here!!
Post Reply
jffffl
Where's the "any" key?
Where's the "any" key?
Posts: 20
Joined: March 3rd, 2008, 12:53 pm
Stroker Displacement: 4.6 liter
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Western Washington

Injector FAQ Information

Post by jffffl »

Is there any interest in adding a FAQ for injectors? There seems to be quite a
lot of information the forum members have gained about injectors. After
reading a couple of posts from "coas" and others, an injector FAQ seemed to be
a good idea. But not one convenient place to find it. Unfortunately I am not the
one with all the knowledge about injectors.

I just ordered a set of Bosch 24lb Generaton III injectors from Five-O Motorsport.
This after sharing what my build is via e-mail, the owner Bruce recommended
Bosch part#013AA302. They are supposed to handle fuel pressures up to 60psi,
I wouldn't think they would distort the spray pattern at 45psi. My 1992 XJ has
39psi, so I may have to adjust my pressure up a bit.
1992 Cherokee Loredo
2001 Cherokee Sport
User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1505
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Oregon
Contact:

Re: Injector FAQ Information

Post by Muad'Dib »

If someone is willing to put something together, i would be more than happy to have this valuable addition to the FAQ's.
If it feels right, then STROKE it!
User avatar
IH 392
I love JeepStrokers.com!!
I love JeepStrokers.com!!
Posts: 725
Joined: October 4th, 2008, 11:15 am
Location: Eugene ORYGUN
Contact:

Re: Injector FAQ Information

Post by IH 392 »

You can get more power out of ANY engine!!!
ASE Master certified engine machinist, gas and diesel
Post Reply

Who is online

Users browsing this forum: Bing [Bot], Google [Bot], Peevee and 5 guests