Jeep Strokers

As far as posting a pole you can only do it in a new topic, not in a reply

I'm considering the stainless steel roller rocker option. Stud mounted and will need guide plates. Referencing p/n's from Dino's site for 5/16 to 3/8 stud and guide plate and considering the comp cams black oxide chromoly steel 1.6 ratio. Not sure what hurdles I will have to consider when going this route…

I read that the threaded stud mount won't pull out with high lift or stiff springs.

and looking for a spring in the range of 115# seat and 280-300# .550 lift. Valvetrain will actually be .528 max lift with 1.6 ratio rockers.


cheers,
Brian

I found that very combination from Crower. Springs, Roller S/s rockets, pushrods. But you have to use the Buick guide plates as all mopars or ford don't fit 7120 head.