Rocker arm upgrades
-
SilverXJ
- Global Moderator
- Posts: 5790
- Joined: February 14th, 2008, 7:14 am
- Stroker Displacement: 4.6L
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Radford, Va
Re: Rocker arm upgrades
As far as posting a pole you can only do it in a new topic, not in a reply
2000 XJ. 4.6L stroker
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
-
beiwulf
- Donator
- Posts: 204
- Joined: September 18th, 2013, 11:18 am
- Stroker Displacement: 4.7Turbo soonish
- Vehicle Year: 1995
- Vehicle Make: ZJ
- Vehicle Model: Laredo
- Location: So.Cal
Re: Rocker arm upgrades
I'm considering the stainless steel roller rocker option. Stud mounted and will need guide plates. Referencing p/n's from Dino's site for 5/16 to 3/8 stud and guide plate and considering the comp cams black oxide chromoly steel 1.6 ratio. Not sure what hurdles I will have to consider when going this route…
I read that the threaded stud mount won't pull out with high lift or stiff springs.
and looking for a spring in the range of 115# seat and 280-300# .550 lift. Valvetrain will actually be .528 max lift with 1.6 ratio rockers.
cheers,
Brian
I read that the threaded stud mount won't pull out with high lift or stiff springs.
and looking for a spring in the range of 115# seat and 280-300# .550 lift. Valvetrain will actually be .528 max lift with 1.6 ratio rockers.
cheers,
Brian
95 Silver ZJ 4x4 4.0L (soon to be stroked/boosted) currently DD
1999 Victory V92 (first year production) street bike/cruiser
95 ZJ Turbo Boosted Stroker build threadhttp://www.jeepstrokers.com/forum/viewt ... f=8&t=4342
1999 Victory V92 (first year production) street bike/cruiser
95 ZJ Turbo Boosted Stroker build threadhttp://www.jeepstrokers.com/forum/viewt ... f=8&t=4342
-
Frankenstien
- I think I'll order a "tab"
- Posts: 46
- Joined: November 15th, 2014, 9:14 am
- Stroker Displacement: 4.6
- Vehicle Year: 1972
- Vehicle Make: jeep
- Vehicle Model: Cj5
Re: Rocker arm upgrades
I found that very combination from Crower. Springs, Roller S/s rockets, pushrods. But you have to use the Buick guide plates as all mopars or ford don't fit 7120 head.
Frankenstein
-
Frankenstien
- I think I'll order a "tab"
- Posts: 46
- Joined: November 15th, 2014, 9:14 am
- Stroker Displacement: 4.6
- Vehicle Year: 1972
- Vehicle Make: jeep
- Vehicle Model: Cj5
Re: Rocker arm upgrades
You do not have the required permissions to view the files attached to this post.
Frankenstein
Who is online
Users browsing this forum: Google [Bot] and 7 guests