JeepStrokers.com Decal \ Window Sticker #2

[Muad'Dib]

Were back here with color variations of the most popular design that was chosen by YOU.

Please choose which one you could imagine on your Vehicle, or the one you like the best.


Thanks very much!

(Dont forget you can use the spyglass in the upper left hand corner of the image to zoom in!)

[amcinstaller]

9 really stands out to the eye, but i think 14 is "smoother"

14

[SilverXJ]

Somebody actually voted for #1?

I'd like to add a few things. The gear teeth will be squared off and made more uniform. These will be printed, clear laminated, then plotted out in the circle form. Plotting out the actually gear shape could throw the plotting off toward the end of the run. I.e. the more moves the plotter makes the more it has a tenancy to get off track.

[oletshot]

9 really stands out to the eye, but i think 14 is "smoother"

14

Lettering on 14 looks a little to pink for me, sorry I disagree.

[SilverXJ]

9 really stands out to the eye, but i think 14 is "smoother"

14

Lettering on 14 looks a little to pink for me, sorry I disagree.

I think that as well. Its due to the red to white gradient.

[1bolt]

I like 15 a lot, and pretty much all the others with the metalic gradient to the piston and crank but one request can we see them without the color in the outermost ring? like 4 and 5 have color inside the gear ring but not out? would make the gear stand out a little more.

If I could pick two like last time, I would pick #1 as well I would buy a couple of each.

[Mgardiner1]

I also voted for #1. This is a sticker, not a badge on a t-shirt. I don't think colors would weather too well, and colors would also make it hard to read. Black and white, to me, is the best "sticker" option

[SilverXJ]

I also voted for #1. This is a sticker, not a badge on a t-shirt. I don't think colors would weather too well, and colors would also make it hard to read. Black and white, to me, is the best "sticker" option

Ink is ink. It will be laminated so the b&w one will weather the same as something like #16.

[Mgardiner1]

The colors would fade unevenly in the sun? The sun fades EVERYTHING LOL Damn UV rays!

[SIXPAK]

#2 and or #15/#16 in that order. Easier to read.

[Muad'Dib]

I personally like #5 and #15. They look the cleanest and look the best in my opinion.

I think 15 would look better if it was like 5 with the color only on the inside of the gear.

[Flash]

My favorite would be #9, Big fan of blue, I like how the Yellow causes logo to stand out, and the image in the back ground lurking Thru.
My 2nt choose would be #18, Like the gray shadowing in the center..........look like a Freshly fired piston........"The beginning of the stroker, pistons life" ......................Ya know, that might look cool, if the center there, had the Quench shape of the piston added......Just a thought............Then i thing that would make it my #1 choice
My 3d would be #19, The "logo" Jump out at you! Then the piston and crank come into focus.
My last pic..........if we could pic more then 1.... would be # 1 as it looks just fine, and would go with any paint job, plain or exotic.


Flash

[1bolt]

hmmm Silverxj can we get a version that combines 15's colors/layout with 5's lack of color outside the gear ring?

[Mgardiner1]

Yeah i like it better with the coloring inside the gear only

Thanks for all the work Silver

[1bolt]

seem to be a lot of thumbs up for 15 but only one vote!