looking to build a stroker...2024

[elkhunter24]

Well, I'm glad I came across this forum. I am looking to learn a lot.

I searched and searched. I found a lot of information, but its all from 12-15 years ago. A lot of the links are expired and it looks like a lot of companies are out of business or sold etc....

So, sorry for making another thread. But can I get some help? Can you guys help me map out a stroker build?

What I have is a 1998 Jeep XJ.
4.0 automatic transmission. 4x4. (stock)

I want to get up to at least 280-300hp and then turbo it. I will build the rear end, suspension etc...after the motor is done. The jeep won't be a daily driver. Mainly just a toy to cruise around. I'll use it for my hunting rig. I'm after low end power and mid power.

As far as the build what should I go with/do?

I'm pulling the motor this weekend. I have a local shop who will hot tank the block, pressure check it, and put it back together. He told me to bring all the parts I want to use and he will get it done for me.

[Cheromaniac]

What's your budget?

[Russ Pottenger]

You’re welcome to reach out to me directly and I would be happy to offer my advice and supply you with a comprehensive stroker kit.

Russ Pottenger
Bishop-Buehl Racing Engines
531 N. Lyall Avenue
West Covina, California 91790
Work (626) 967-1000
Cell (626) 673-2203
Email: [email protected]

[elkhunter24]

What's your budget?

5,000 tops

[elkhunter24]

You’re welcome to reach out to me directly and I would be happy to offer my advice and supply you with a comprehensive stroker kit.

Russ Pottenger
Bishop-Buehl Racing Engines
531 N. Lyall Avenue
West Covina, California 91790
Work (626) 967-1000
Cell (626) 673-2203
Email: [email protected]

can you ship the parts to me? I wouldn't need any motor work done with us living so far away from each other. shipping would probably kill me sending my block that far out.

[Russ Pottenger]

I don’t ship engines but would be happy to supply you a kit with a head.

Feel free to reach back out to me if I can be of any further help.

Thanks,
Russ

[Russ Pottenger]

Feel free to reach out to me if you would like a kit

Thanks,
Russ