More Gauges/Sensors

[Sailboy42]

Are there any gauges or sensors that can be added to the engine that would be worthwhile to monitor the motor?

[Cheromaniac]

gauges.jpg

I'd added an engine oil temperature gauge plus an air/fuel ratio gauge that ran off an O2 sensor that I had placed in the header collector.

http://www.angelfire.com/my/fan/oiltemp.html

[SilverXJ]

Oil temp and Air fuel ratio would be the first 2. After that I would do a redundant oil pressure gauge and a transmission temp if you have an auto.

[Sailboy42]

Okay, that goes along with my research.

[Sailboy42]

Any suggested brands or placements?

[Sailboy42]

These are what I'm thinking:

Oil Temp- AutoMeter 9240
https://www.summitracing.com/parts/atm-9240

Wideband- AEM Electronics 30-0334 - AEM Electronics X-Series Wideband UEGO Air/Fuel Sensor Controller Gauges
https://www.summitracing.com/parts/avm-30-0334

Aeromotive Fuel Pressure Gauges 15633
https://www.summitracing.com/parts/aei-15633
-this I will connect to a gauge port on my regulator

Does anyone have experience with these?

[Andre_ITALY]

I am also looking for an a / f meter for my 97 TJ!

https://www.aemelectronics.com/products ... uego-OBDII

or

https://www.aemelectronics.com/products ... ller-gauge

What advantages do I have with 30-0334 (obd2) ?

An EGT gauge is a waste of money on n/a application?

THANKS!