Following the machine work FAQ post = $1095 in machine cost (seems like a lot for machine work)
Block:
1. hot tank or oven bake. (cleaning) $75 to clean, shot blast, and mag block
2. shot blast.
3. magnaflux. (check for cracks)
4. line hone the main bearing bores if needed. (I would recommend this for bearing clearance) $150
5. bore and hone to desired size. (I.E. over .030) $250
6. check deck for flatness if not milling, if milling tell them how much. (I.E. have .030 decked off.) $75
7. Install cam bearings. $25-$30
Crankshaft:
1. hot tank or oven bake if dirty. $25
2. grind mains and rods to desired size, or offset grind if desired. $125
2a. Chamfer oil holes if desired. (better oiling) $25
3. spin balance. (optional) $50
Connecting Rods:
1. hot tank or oven bake if dirty. $25
2. shot peen if desired. (for strength) $30
3. check for straightness. $15
4. install rod bolts if desired. $25
5. resize bearing journals. $125
6. weight balance. $20
7. install pistons. $50
The for remainder parts
clearwarter head - $600
Gasket set - $100
Pistons - $400
258 crank - $50
So Im already at $2195 here without bearings, oil pump, freeze plugs, timing chain, camshaft. I'm starting to think https://titanengines.com/jeep-strokers/ ... o-4-6-4-7/ this kit seems like a really good value and maybe I should just sell off the crank I bought.
Also questions on heads does a standard head work just fine with a stroker or does it need different valves, porting, etc? Basically if I bought a clearwater head can I just slap it on the stroker and go? I also have the 12 port bosch injectors from K suspension would those be able to be used or would I need even more flow?
Any guidance on why I should or shouldn't use the titan kit or where I can save some money on this would be appreciated... I thought when I found the crank so cheap I was ahead of the game but it doesn't really look like it.
![Image](https://scontent.xx.fbcdn.net/v/t1.15752-9/104287910_321230655550394_5804632585975009091_n.jpg?_nc_cat=100&_nc_sid=b96e70&_nc_ohc=GwsCGHQWkbMAX-TLkfH&_nc_ad=z-m&_nc_cid=0&_nc_ht=scontent.xx&oh=287128b2f484d569028306f7154ec568&oe=5F14A16F)
![Image](https://scontent.xx.fbcdn.net/v/t1.15752-9/104268049_1428878877299005_1602486631630493918_n.jpg?_nc_cat=100&_nc_sid=b96e70&_nc_ohc=uQRSB5S-eeEAX8saa_Z&_nc_ad=z-m&_nc_cid=0&_nc_ht=scontent.xx&oh=9e3a4ed48dc1f2fca9ca0fc5a4ab748b&oe=5F16D72F)
![Image](https://scontent.xx.fbcdn.net/v/t1.15752-9/104493319_281437036393205_7037352296965861990_n.jpg?_nc_cat=103&_nc_sid=b96e70&_nc_ohc=OLeKmbvvmDIAX87fw1-&_nc_ad=z-m&_nc_cid=0&_nc_ht=scontent.xx&oh=d368d391a405ca3d541069a94236f8ee&oe=5F1427A5)