I've sold my child

Newbies, and basic Stroker Recipes... Get started with your first stroker here!!
User avatar
Cheromaniac
I live here
I live here
Posts: 3211
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

I've sold my child

Post by Cheromaniac »

It's with great sadness that I had to end my 21-year ownership of my Jeep yesterday. :(
I'll be relocating to Cyprus in about 2 weeks' time to be reunited with my loved ones, start a new chapter in my life, and start a new job in a private hospital. Unfortunately the Jeep couldn't go with me 'cause it's left hand drive and Cyprus is a right (some might say wrong) hand drive country like the UK. Due to its advanced age I wouldn't be able to register it so I very reluctantly had to part with it. The new owner is another Jeep enthusiast who's been following my sites for years so when he heard that I was selling it, he was all over it like a bee to honey! Yesterday he drove it off into the sunset (literally) on the highway to his home in Abu Dhabi a very happy bunny.
I've loved that Jeep since day one and it's forever etched into my heart. It's been an absolute peach. I really couldn't have wished for a more reliable car and I've had a lot of happy memories with it. I'll continue to lurk around in the forum offering any words of wisdom that I can and my sites will, of course, stay up as a tribute to the old warhorse.
You do not have the required permissions to view the files attached to this post.
1992 XJ 4.6 I6 - 5MT - Stroker build-up, Stroker "recipes" Sold
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car :mrgreen:
jsawduste
My keyboard is getting warn out
My keyboard is getting warn out
Posts: 1032
Joined: February 28th, 2008, 3:13 am
Stroker Displacement: 4.9
Location: Michigan

Re: I've sold my child

Post by jsawduste »

I know a guy named Russ that is pretty sharp with strokers.

Maybe you could contact him and about building another ?
Russ Pottenger
Strong Poster
Strong Poster
Posts: 911
Joined: August 15th, 2009, 1:27 am
Stroker Displacement: 4.7
Vehicle Year: 2000
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: I've sold my child

Post by Russ Pottenger »

jsawduste wrote:I know a guy named Russ that is pretty sharp with strokers.

Maybe you could contact him and about building another ?
X2

Dino,
Wishing you the very best going forward in the new chapter of your life.

Just keep reminding yourself my friend, as one door closes another will open up to bigger and better opportunities
User avatar
Cheromaniac
I live here
I live here
Posts: 3211
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: I've sold my child

Post by Cheromaniac »

Russ Pottenger wrote:Just keep reminding yourself my friend, as one door closes another will open up to bigger and better opportunities
Indeedy. That's exactly how I see it. :D
I also have a 2006 Mustang GT and I'll be shipping that to Cyprus. I can register only one LHD vehicle so that'll be it.
jsawduste wrote:Maybe you could contact him and about building another ?
LOL yeah, I've no doubt he could build me a great stroker but I'd need to find another Jeep to put it in first. :lol:
User avatar
gradon
Donator
Donator
Posts: 1353
Joined: February 13th, 2008, 5:33 pm
Stroker Displacement: 4.6/280ci
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: DC

Re: I've sold my child

Post by gradon »

:roll:
User avatar
Cheromaniac
I live here
I live here
Posts: 3211
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: I've sold my child

Post by Cheromaniac »

gradon wrote::roll:
Why the rolling eyes? :?
GreenYJ
Making Progress
Making Progress
Posts: 56
Joined: October 21st, 2016, 2:02 pm
Vehicle Year: 1994
Vehicle Make: Jeep
Vehicle Model: Wrangler

Re: I've sold my child

Post by GreenYJ »

Dino,
Sorry you had to sell your child. I have been reading about your modifications for many years now. I really appreciate all the information you've compiled and shared with...the world, I guess? It's definitely more accurate and informative than depending on magazine articles. Haha. Anyway, hope you can find another jeep adventure in your future.

Thanks, Roger
1994 Sahara YJ
Andre_ITALY
Learning to use the board
Learning to use the board
Posts: 36
Joined: January 7th, 2016, 9:31 am
Vehicle Year: 1997
Vehicle Make: Jeep
Vehicle Model: TJ 4.0
Location: Bologna, ITALY

Re: I've sold my child

Post by Andre_ITALY »

:cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry:
User avatar
darkcorp
I made it to triple digits!
I made it to triple digits!
Posts: 101
Joined: November 14th, 2013, 12:21 am
Stroker Displacement: 4.6L
Vehicle Year: 1999
Vehicle Make: JEEP
Vehicle Model: GCh 4.0
Location: Kazan/Russia
Contact:

Re: I've sold my child

Post by darkcorp »

Wow, I wish you a new bright page in your history book!
User avatar
SilverXJ
Global Moderator
Global Moderator
Posts: 5790
Joined: February 14th, 2008, 7:14 am
Stroker Displacement: 4.6L
Vehicle Year: 2000
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Radford, Va

Re: I've sold my child

Post by SilverXJ »

That is quite sad, but life brings changes. I hope you won't be a stranger to the various Jeep forums though. Perhaps you could pick up an XJ or ZJ in Cyprus and build a new stroker for it. I'm not too far behind you in my XJ ownership, 16 years. I don't know if you recall, but my first major modification was when I was still on Jeepsunlimited and swapped a 0630 head and earlier header (the was no 00+ header then) on my 2000 XJ w/ cali emissions. Probably around 2002. I questioned you heavily prior to that swap. I hope you stick around. :cheers:
User avatar
Cheromaniac
I live here
I live here
Posts: 3211
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: I've sold my child

Post by Cheromaniac »

I don't think I'll be buying a 4.0L Jeep in Cyprus and building a stroker for it. The cost and hassle just isn't worth it, and the 2.5L turbodiesel XJs were more popular for their lower running costs.
At least my 2006 Mustang GT has arrived now. I just need to complete the customs clearance in Limassol Sea Port and arrange insurance cover to drive it away. :D
User avatar
Cheromaniac
I live here
I live here
Posts: 3211
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: I've sold my child

Post by Cheromaniac »

received_10156697786054916.jpeg
received_10156697786059916.jpeg
received_10156697786049916.jpeg
Kemosabe lives on!
The new owner installed a lift kit, snorkel, fender flares, and bigger wheels to transform my old Jeep from street machine into an offroad beast. :D
You do not have the required permissions to view the files attached to this post.
1992 XJ 4.6 I6 - 5MT - Stroker build-up, Stroker "recipes" Sold
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car :mrgreen:
User avatar
SkylinesSuck
Donator
Donator
Posts: 545
Joined: February 14th, 2009, 11:11 pm
Stroker Displacement: 4.6L
Vehicle Year: 1998
Vehicle Make: Jeep
Vehicle Model: Wrangler
Location: Northern VA

Re: I've sold my child

Post by SkylinesSuck »

Nice! Glad to see it live one and get taken care of. I know that Jeep inspired many (including myself) to do a stroker.
Jeeper2017
Posts: 5
Joined: January 19th, 2017, 6:20 pm
Stroker Displacement: 4.7L

Re: I've sold my child

Post by Jeeper2017 »

The one who bought the Jeep was very lucky. It looks great! I wonder what Jeep lift kit he installed. By the way, are those Bushwacker fender flares?
User avatar
Cheromaniac
I live here
I live here
Posts: 3211
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: I've sold my child

Post by Cheromaniac »

Yeah, they sure look like Bushwackers. I believe the lift kit is 3" and the tires are 30". Still running on stock 3.07 axle gears but Samer (the new owner) is considering swapping axles from a later model automatic with 3.55's.
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 2 guests