New header option

[akadeutsch]

What do we think of this header? Ever head of DPT? It is 1/2 the price of the other option.

http://www.ebay.com/itm/00-06-JEEP-WRAN ... 5e&vxp=mtr

[akadeutsch]

The DPT unit looks just like the Flow Daddy setup which looks just like the expensive banks header. Except the Flow Daddy is made of 409 stainless, while the DPT is made of 304 stainless, and the banks is again made of 409 stainless...
Is it worth paying double the price for the banks unit? And why is the cheapest one made of the best stainless? I am pretty sure that 304 is better (more expensive) that 409
The DPT unit looks pretty good right now.

[SilverXJ]

The auction doesn't really say much. Need more details such as tubing gauge, flange thickness, and collector diameter. 1.75" is also an odd size for the primaries... most others are 1.5" for that year range.

[akadeutsch]

http://www.ebay.com/itm/STAINLESS-STEEL ... 1478899806

89.00 bucks is just about right

[CandyCaneXj]

Someone needs to come up with a header with dual 2 1/4 inch collectors for a true dual exhaust for some of the higher hp strokers

[SilverXJ]

According to specs the Banks and Borla for the later Jeeps are 2.25" collectors.

[shawnxj]

anybody buy 1? how's the quality?

[akadeutsch]

I plan to get one just to see how they are. I figure I cant go wrong spending under 100 bucks. Even if it is shit.

[mark2215]

Someone needs to come up with a header with dual 2 1/4 inch collectors for a true dual exhaust for some of the higher hp strokers

I have JBA headers, the exhaust shop cut the ball flanges off and the collector is 2.25". I installed 2.5" pre-cats to 3" exhaust the rest of the way back.

[akadeutsch]

I just bid on this header from Ebay. 14 gauge, 409 stainless, with a 1/2 flange. If It comes for under 100 bucks I'll take it. I just can't afford 500+ for a header.
http://www.ebay.com/itm/Jeep-Cherokee-W ... fresh=true

[CandyCaneXj]

According to specs the Banks and Borla for the later Jeeps are 2.25" collectors.

Im seeing them listed as two 2"s everywhere.

[CandyCaneXj]

Someone needs to come up with a header with dual 2 1/4 inch collectors for a true dual exhaust for some of the higher hp strokers

I have JBA headers, the exhaust shop cut the ball flanges off and the collector is 2.25". I installed 2.5" pre-cats to 3" exhaust the rest of the way back.

one or two collectors?

[mark2215]

Someone needs to come up with a header with dual 2 1/4 inch collectors for a true dual exhaust for some of the higher hp strokers

I have JBA headers, the exhaust shop cut the ball flanges off and the collector is 2.25". I installed 2.5" pre-cats to 3" exhaust the rest of the way back.

one or two collectors?

There are two 2.25" collectors. JBA states 2.5" collectors but they are closer to 2.25"

[wjdstroked]

I have banks good quality but has any one seen down pipe that collects 2 pipes to 3in before cat.

[akadeutsch]

I posted that same question a little while ago and I got no response. I think we are stuck with our factory 2.5 inch down pipe. I have been looking for a 3 incher with no luck.