Have to relocate ign. Coil? And PVC breather/catch can ?

Newbies, and basic Stroker Recipes... Get started with your first stroker here!!
Defcon92
Making Progress
Making Progress
Posts: 84
Joined: January 8th, 2014, 6:35 pm
Stroker Displacement: 4.2l
Vehicle Year: 1992
Vehicle Make: Jeep

Re: Have to relocate ign. Coil? And PVC breather/catch can ?

Post by Defcon92 »

SilverXJ wrote:I forgot to replay to this, but Cheromaniac is correct. Rear line will see the most volume of crankcase fumes under normal driving.
That's how I've got it setup now. But Even though the rear has tiny hole ccv elbow it see more crank fumes? The rear grey valve has a much smaller hole than the front.
The elbows I run are stock from the jeep dealership.
rainman
I think I'll order a "tab"
I think I'll order a "tab"
Posts: 44
Joined: March 30th, 2011, 5:00 am
Stroker Displacement: 4.6
Vehicle Year: 1995
Vehicle Make: Jeep
Vehicle Model: XJ

Re: Have to relocate ign. Coil? And PVC breather/catch can ?

Post by rainman »

I'm not sure the coil has to be earthed through the mounting bolt holes.
My coil died , I cable tied a spare I had to the dead coil on the block plugged in the plug and the hy lead to the dizzy and it drove fine.
Obd1 scanner.
'95 sport,4.6 stroker, 4.5" lift, 32"s, 4:10's, 8.25&SYE, taurus fan
Sydney Australia
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 2 guests