High Idle

Post by **jdobbs** » July 5th, 2014, 1:15 pm

I bored out my throttle and now it has a high idle and a loud whistle. Is there a fix for this?

Post by **SilverXJ** » July 5th, 2014, 4:16 pm

How exactly did you bore it out?

Post by **jdobbs** » July 5th, 2014, 6:14 pm

I ground out the extra aluminum to the gasket opening size

Post by **SilverXJ** » July 5th, 2014, 6:30 pm

Did you grind all the way through?

Post by **jdobbs** » July 5th, 2014, 8:27 pm

No it is just a little more then flush with the opening above the butterfly

Post by **SilverXJ** » July 6th, 2014, 6:22 am

You might want to check that you didn't actually go into where the throttle plate sits.

You obviously have a leak some place so check everything you took off. Gasket, IAC, MAP sensor, TPS, any hose you had to remove, etc.

High Idle

High Idle

Re: High Idle

Re: High Idle

Re: High Idle

Re: High Idle

Re: High Idle

Who is online