) build. I hear about FMS (can't find them instock), Venom, Accel, etc. What injector will work with my harness? Anyone have part numbers and a place that has them in stock? I don't do Ebay. THANKS!Injector part number needed.
-
Stroker Ace
- Where's the "any" key?
- Posts: 24
- Joined: September 29th, 2012, 8:04 pm
- Stroker Displacement: 4.6L
- Vehicle Year: 1998
- Vehicle Make: Jeep
- Vehicle Model: Wrangler
- Location: So Cal
Injector part number needed.
Last piece of the puzzle is to get injectors before I install the stroker. My jeep is a 1998 and the its a low buck California smog friendly ( ) build. I hear about FMS (can't find them instock), Venom, Accel, etc. What injector will work with my harness? Anyone have part numbers and a place that has them in stock? I don't do Ebay. THANKS!
) build. I hear about FMS (can't find them instock), Venom, Accel, etc. What injector will work with my harness? Anyone have part numbers and a place that has them in stock? I don't do Ebay. THANKS!-
JeepFamily
- Making Progress
- Posts: 60
- Joined: January 15th, 2012, 7:04 am
- Stroker Displacement: 4.7
- Vehicle Year: 1997
- Vehicle Make: Jeep
- Vehicle Model: ZJ
- Location: Butte Montana
Re: Injector part number needed.
I would recommend a set from Fuel Injector Connection. These are flow balanced units. I've also found it very helpful to speak directly to them, found them easy to get a hold of and very knowledgable. They have a set specifically for your stroker and came highly recommended by my machinist. I have a set installed in my 4.7 stroker. Below is a link to their site.
http://fuelinjectorconnection.com/shop/ ... ductid=279
http://fuelinjectorconnection.com/shop/ ... ductid=279
JeepFamily (Rob)
1997 ZJ 4.7 Stroker
2000 WJ Limited (Totaled)
2002 WJ Limited 4.7HO (Sold)
2003 WJ Overland 4.7HO
2005 WK Limited (sold)
1997 ZJ Orvis 5.2 Up Country(48K miles)
1997 ZJ Laredo (parting out)
1998 ZJ Limited 5.9
Wrangler Want-ta-get-one
1997 ZJ 4.7 Stroker
2000 WJ Limited (Totaled)
2002 WJ Limited 4.7HO (Sold)
2003 WJ Overland 4.7HO
2005 WK Limited (sold)
1997 ZJ Orvis 5.2 Up Country(48K miles)
1997 ZJ Laredo (parting out)
1998 ZJ Limited 5.9
Wrangler Want-ta-get-one
-
FlyinRyan
- I made it to triple digits!
- Posts: 157
- Joined: October 5th, 2012, 9:00 pm
- Location: Houston area, Texas
- Contact:
Re: Injector part number needed.
OP, what are you doing for tuning your stroker?
-
JeepFamily
- Making Progress
- Posts: 60
- Joined: January 15th, 2012, 7:04 am
- Stroker Displacement: 4.7
- Vehicle Year: 1997
- Vehicle Make: Jeep
- Vehicle Model: ZJ
- Location: Butte Montana
Re: Injector part number needed.
We are using a PLX Devices OBD II WiFi connector and Droid smart phone running Dash Command. Is this what you mean? So far we haven't had to make any changes to the MAP or PCM to get the engine within specs.
JeepFamily (Rob)
1997 ZJ 4.7 Stroker
2000 WJ Limited (Totaled)
2002 WJ Limited 4.7HO (Sold)
2003 WJ Overland 4.7HO
2005 WK Limited (sold)
1997 ZJ Orvis 5.2 Up Country(48K miles)
1997 ZJ Laredo (parting out)
1998 ZJ Limited 5.9
Wrangler Want-ta-get-one
1997 ZJ 4.7 Stroker
2000 WJ Limited (Totaled)
2002 WJ Limited 4.7HO (Sold)
2003 WJ Overland 4.7HO
2005 WK Limited (sold)
1997 ZJ Orvis 5.2 Up Country(48K miles)
1997 ZJ Laredo (parting out)
1998 ZJ Limited 5.9
Wrangler Want-ta-get-one
-
SilverXJ
- Global Moderator
- Posts: 5790
- Joined: February 14th, 2008, 7:14 am
- Stroker Displacement: 4.6L
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Radford, Va
Re: Injector part number needed.
No, that isn't tunning, but monitoring.
2000 XJ. 4.6L stroker
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
-
grainofsalt
- I think I'll order a "tab"
- Posts: 47
- Joined: November 9th, 2011, 6:52 pm
- Stroker Displacement: 4.61
- Vehicle Year: 1998
- Vehicle Model: XJ
Re: Injector part number needed.
I offered them $100 shipped and they took the offer: http://www.ebay.com/itm/310136653389?ss ... 1436.l2649
Great customer service, Now I just need summit to send me a good water pump so that I can get the motor in and running.
Great customer service, Now I just need summit to send me a good water pump so that I can get the motor in and running.
-
JeepFamily
- Making Progress
- Posts: 60
- Joined: January 15th, 2012, 7:04 am
- Stroker Displacement: 4.7
- Vehicle Year: 1997
- Vehicle Make: Jeep
- Vehicle Model: ZJ
- Location: Butte Montana
Re: Injector part number needed.
very good indeed!!!
JeepFamily (Rob)
1997 ZJ 4.7 Stroker
2000 WJ Limited (Totaled)
2002 WJ Limited 4.7HO (Sold)
2003 WJ Overland 4.7HO
2005 WK Limited (sold)
1997 ZJ Orvis 5.2 Up Country(48K miles)
1997 ZJ Laredo (parting out)
1998 ZJ Limited 5.9
Wrangler Want-ta-get-one
1997 ZJ 4.7 Stroker
2000 WJ Limited (Totaled)
2002 WJ Limited 4.7HO (Sold)
2003 WJ Overland 4.7HO
2005 WK Limited (sold)
1997 ZJ Orvis 5.2 Up Country(48K miles)
1997 ZJ Laredo (parting out)
1998 ZJ Limited 5.9
Wrangler Want-ta-get-one
-
Muad'Dib
- Site Admin / Owner
- Posts: 1505
- Joined: January 8th, 2008, 10:55 am
- Stroker Displacement: 4.7L
- Vehicle Year: 1990
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Oregon
- Contact:
Re: Injector part number needed.
I didnt realise that you needed EV1 Connector Style Injectors.. im selling some. Oh well 
If it feels right, then STROKE it!
Who is online
Users browsing this forum: Amazon [Bot], Bing [Bot] and 4 guests