timing sets

Post by **shawnxj** » February 15th, 2012, 6:58 pm

does anybody know if the jp performance or the rollmaster timing sets are still available? i can't find anybody who has them anymore and falconglobal's ebay store seems to have disappeared as well unless my googlefu just isn't what it used to be

Post by **Sharp Rock** » February 15th, 2012, 7:19 pm

Have you checked ebay just doing a search on "Rollmaster"? I found them both quickly by searching the part number CS7100. I have one on the way from Fastengineparts.

Fastengineparts has the best price and free shipping: http://www.ebay.com/itm/AMC-196-232-258 ... 4cfe0507c6

And Falconglobal has them here for more money and NOT free shipping: http://www.ebay.com/itm/ROLLMASTER-232- ... 27acf97d2c

Hope that helps, and I hope I didn't break a forum rule by posting ebay links.

Jerry

Post by **shawnxj** » February 15th, 2012, 7:34 pm

wow my googlefu must really be broken....thanks man

Post by **Muad'Dib** » February 16th, 2012, 6:29 pm

You can also probably get a better deal by contacting FalconGlobal directly (through ebay works) and also bundling it with other parts you need. Just send them a parts list and they can tell you what they can and cant provide.

Post by **spdrcr137** » February 24th, 2012, 8:22 am

Just got mine delivered yesterday from Fastengineparts, found them on ebay. They were cheaper than falcon. The set looks great.

Post by **shawnxj** » February 24th, 2012, 2:13 pm

mine came in tuesday from fastengineparts so i can't complain

Post by **Cheromaniac** » February 25th, 2012, 1:30 am

You can get the Cloyes dual roller timing set from Summit Racing for only slightly more:

http://www.summitracing.com/parts/CLO-9-3127/

Post by **Muad'Dib** » February 26th, 2012, 10:58 am

I personally dont like how the Cloyes has a billet crank gear and a cast cam gear.

Post by **shawnxj** » February 26th, 2012, 1:24 pm

Muad'Dib wrote:I personally dont like how the Cloyes has a billet crank gear and a cast cam gear.

that's why i went with the rollmaster

Post by **IH 392** » February 26th, 2012, 4:12 pm

MILLIONS! of timing sets are in service every day that have sand cast cam gears an investment cast crank gears, they are reliable!

Post by **spdrcr137** » February 27th, 2012, 1:45 pm

I'm sure there are millions in service every day, but if you can get billet over cast for less why wouldn't you?

Post by **Dezertxj88** » February 27th, 2012, 10:40 pm

Question, Is that "Rollmaster" a dual roller? I think the cloyes is and thats why I was going to buy/run it...advice here?
4.2L mini stroker, 9:1 CR about 10psi on pump & meth...advice on a timing set?

Post by **SilverXJ** » February 28th, 2012, 4:17 am

The Rollmaster/JP set is a dual roller.

Post by **Dezertxj88** » February 28th, 2012, 12:38 pm

SilverXJ wrote:The Rollmaster/JP set is a dual roller.

Ok and even though it says 232/258 it can be used in the 242(4.0L)?

Post by **SilverXJ** » February 28th, 2012, 6:19 pm

I think so, but what part number are you looking at?

timing sets

timing sets

Re: timing sets

Re: timing sets

Re: timing sets

Re: timing sets

Re: timing sets

Re: timing sets

Re: timing sets

Re: timing sets

Re: timing sets

Re: timing sets

Re: timing sets

Re: timing sets

Re: timing sets

Re: timing sets

Who is online