what am i missing?

Post by **bradcarrier** » December 23rd, 2011, 5:32 pm

About to install my stroker in my 95 jeep yj. I've got the 24# blue top injectors, just ordered my luk pro gold clutch clutch, do I need anything else to make this work with with my jeep. Do I need a different pilot bearing because of the 4.2 crank, anything else I'm missing? Thanks

Post by **Missourian** » December 24th, 2011, 10:13 am

Pilot bearing is the same and make sure you replace your throw out bearing while you are doing all this to reduce risk of having to pull it all back apart.

Post by **Cheromaniac** » December 24th, 2011, 11:43 pm

You'll need pilot bearing no. 53009180AB.

Post by **bradcarrier** » December 28th, 2011, 12:05 pm

Cheromaniac wrote:You'll need pilot bearing no. 53009180AB.

You must be DINO, thanks for all the good info!!!

Post by **6TIME** » December 28th, 2011, 2:53 pm

That Mopar pilot bearing number crosses over to a TIMKEN/BCA/NATIONAL part #FC69907, That might be more readily available in local parts stores if they have problems cross referencing from the Mopar #....

Post by **Cheromaniac** » December 28th, 2011, 10:06 pm

bradcarrier wrote:
Cheromaniac wrote:You'll need pilot bearing no. 53009180AB.
You must be DINO, thanks for all the good info!!!

Yup. I'm Dino and you're welcome.

what am i missing?

what am i missing?

Re: what am i missing?

Re: what am i missing?

Re: what am i missing?

Re: what am i missing?

Re: what am i missing?

Who is online