Oil for 4.6L stroker
- SilverXJ
- Global Moderator
- Posts: 5790
- Joined: February 14th, 2008, 7:14 am
- Stroker Displacement: 4.6L
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Radford, Va
Re: Oil for 4.6L stroker
You probably know this already, but if you don't lead and O2 sensors don't get along too well.
2000 XJ. 4.6L stroker
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
-
- Movin on up ^
- Posts: 357
- Joined: February 25th, 2009, 10:40 am
Re: Oil for 4.6L stroker
100LL AVGas will let a new set of narrowband O2 sensors live for 10K - 25K miles... *IF* he is maintaining a closed loop oxygen sensor ECU for the baja race... then you should be able to just replace the sensors each race and be fine.
-
- Noob
- Posts: 15
- Joined: March 10th, 2011, 11:46 am
- Stroker Displacement: 4.6L
- Vehicle Year: 2004
- Vehicle Make: Jeep
- Vehicle Model: TJ
Re: Oil for 4.6L stroker
I only have a wideband o2.. I figured I would have to replace it each year but thats no problem..
- PolloLoco
- Donator
- Posts: 212
- Joined: March 8th, 2009, 6:39 am
- Stroker Displacement: 4.7L
- Vehicle Year: 1997
- Vehicle Make: Jeep
- Vehicle Model: TJ
- Location: DeRidder, LA
Re: Oil for 4.6L stroker
Amsoil has revised this bulletin and has added more oils with high levels of zinc:SilverXJ wrote:Amsoil does have some other high Zinc oils: http://jeep.blackonyx.net/forum/Amsoil_ ... Tappet.pdf
Brad Penn has a semi-synthetic high zinc oil and Joe Gibbs makes a good dino oil with high zinc. And as I said before the Valvoline Racing oil is good (not the VR1).
http://www.amsoil.com/techservicesbulle ... tappet.pdf
My next oil change will use Z-ROD 10W30 but for the OP there is a list of racing oils that you should use.
4.7L Stroker, 4.88 Ford 8.8 w/Auburn ECTED, HP30 w/ARB, AX-15, NP231 w/RR SYE, 33x10.50 BFG A/T, 4" Skyjacker, 1" body lift, 1" MORE motor mounts, Kilby fuel tank skid, UCF ultra-high clearance 1/4" skid, HMMWV-style snorkel, 63mm TB
-
- Donator
- Posts: 1245
- Joined: February 13th, 2008, 6:20 pm
- Stroker Displacement: 4.6
- Vehicle Year: 2003
- Vehicle Make: Jeep
- Vehicle Model: Wrangler
Re: Oil for 4.6L stroker
Valvoline vr1 has .13 zinc and .12 phospherus (see item number 6).
http://www.valvoline.com/faqs/motor-oil/racing-oil/
http://www.valvoline.com/faqs/motor-oil/racing-oil/
Who is online
Users browsing this forum: Ahrefs [Bot] and 6 guests