Roller Camshaft Poll

[John]

Trying to gauge interest in moving the roller cam project forward, One person with deep pockets can do this or if there is enough common ground interest, it could be done at a better price. It will still cost more than catalog cams.
What end use would you put this motor to? You can pick a first and second choice, (Flash can"t make up his mind).
If he does I allowed re-voting.
If you haven't, you should read this, viewtopic.php?f=5&t=105

If I could purchase a roller cam set for my I6 it would be purchased for:

John


PS If you have other options let me know and I will see if we can include them.

[1bolt]

I think another choice is reliability, the roller valvetrain doesn't need the higher ZDDP content, and is less likely to eat a lobe during breakin.

[John]

1bolt please feel free to add reliability to the poll. Thanks for the input.
John

[1bolt]

done, cleaned it up a little.

[John]

Can we retrieve the data that was there before the change?
If not we can vote again.
John

[Flash]

just a reminder for every on to vote!!!!!!!! If it don't show you have voted.........You haven't as the poll was reset to add one more option to vote one.........reliability

Flash

[gradon]

I didn't vote because I'm going with what I have. I might be interested in the distant future, but don't want to be counted on a group buy. I will of course be following the development and will be providing positive reinforcement.
Improved performance and reliability would be mine.

[Muad'Dib]

I voted

[oletshot]

I didn't vote because I'm going with what I have. I might be interested in the distant future, but don't want to be counted on a group buy. I will of course be following the development and will be providing positive reinforcement.
Improved performance and reliability would be mine.

X 2.

[John]

This poll is not about signing up for a group buy, but if this project moves forward, it might help to know what the majority of us might be like to see become available.
John

[Flash]

This poll is not about signing up for a group buy, but if this project moves forward, it might help to know what the majority of us might be like to see become available.
John

That what i felt the poll was all about...........but i thought i had better wait for your post before i spoke out of turn.

Flash

[Jeep-Power]

I voted for street and crawling--

I think the 'crawling' and 'trail' are redundant-- we might want to consider them one in the same. To me it equates better off-highway performance.

We all will like better relaibility

[milner]

Talk Torque.

Speak with CRANE on Roller Camshafts - big belt of Torque across the Power Band.

What's happening with the Roller Lifter Bars [bar connectors] - we'll need these available.

[gremlinsteve]

any update on these cores???

steve

[amcinstaller]

sorry, dont have a jeep anymore, wish i kept it, ive heard people running E85 in them, mostly stock.

anyway, strokers for my small body AMC, had to go performance and strip!!