Lifter Noise, What can I do about it?

Post by **AlexTJ** » September 15th, 2010, 6:27 am

I'm just running the stock OBDII for now with 24# injectors

Post by **AlexTJ** » September 18th, 2010, 11:02 am

Got the new lifters in and re-broke it in. Sooooooo much better/quieter

Post by **SilverXJ** » September 18th, 2010, 4:43 pm

No damage to the push rods, rockers, or valve stems?

Post by **AlexTJ** » September 19th, 2010, 12:39 pm

Didn't see any at all! Cleaned the slightly toasty assembly lube off of them and found no pits, cracks, bends or any material removed at all. A few had slightly shiny spots where the fulcrums contacted the rockers but there was no material removed that my finger nail could catch on. I coated them all with obscene amounts of Torco MPZ and filled the rocker dishes with it. Started it up and the valve-train is super quiet. Quieter than I've even had it with the titan or when I started driving it with a 4.0 w/ 97,000 miles.

Post by **SilverXJ** » September 19th, 2010, 5:01 pm

Looks like you got lucky! Glad it is running sort of well.

Post by **AlexTJ** » September 20th, 2010, 9:16 am

SilverXJ wrote:Looks like you got lucky! Glad it is running sort of well.

Yeah thanks! It runs great as long as you either keep it under 2000rpm or floor it lol

Lifter Noise, What can I do about it?

Re: Lifter Noise, What can I do about it?

Re: Lifter Noise, What can I do about it?

Re: Lifter Noise, What can I do about it?

Re: Lifter Noise, What can I do about it?

Re: Lifter Noise, What can I do about it?

Re: Lifter Noise, What can I do about it?

Who is online