Low oil pressure question

[oletshot]

Here are my options on location of squirter. Are either of these where you put yours? Top image would try to hit cam gear, bottom image would hit dizzy gear.

[John]

Mine are all internal to the case. I tried to hit the distributor gear. Really unsure if it would change much,if you put extra oil on one of the two gears, you will put extra oil on both.
John

[oletshot]

Ok, distributor gear it is. I know the oil will hit that, trying to hit the cam gear was going to be a crap shoot and I didn't feel it made a difference which one I hit just wanted other opinions. I just have to make sure only the oil hits the gear and not the fitting too. Otherwise it looks pretty straight forward. I also going to grind a flat on one of the extra lifters to make my own camsaver lifter just for fun (they sent me 16 lifters with my cam). I'm not sure how deep the flat is, for now I'll just eyeball it to the picture. I'll post a picture after it's done.

[John]

http://www.hesco.us/forum/forum_posts.a ... PN=1&TPN=3
Thought you might find this interesting, third entry.
John

[Flash]

http://www.hesco.us/forum/forum_posts.a ... PN=1&TPN=3
Thought you might find this interesting, third entry.
John

What i found REAL interesting was the 5th post, and about the drain back oil for the dist.


Flash

[John]

Oh poo, I am loosing my ability to count now. That's the one.
John