Injectors and CFC

Newbies, and basic Stroker Recipes... Get started with your first stroker here!!
Post Reply
Boilermaker
Donator
Donator
Posts: 29
Joined: February 13th, 2008, 5:47 pm

Injectors and CFC

Post by Boilermaker »

Not sure this is the right forum, so mods please move if necessary.

There's a local metal scrapyard with lots of CFC vehicles. Since they are more of a metal recycler than a junkyard, they don't charge much for parts, and small parts they sometimes just let people take for free. I picked up 8 Ford Injectors, F55E-A2D for free over the weekend. They don't generally ask what car each part comes off of, and i wasn't volunteering that info because they may not have allowed me to take them. There's a tag on the engine stating its a CFC vehicle and that liquid silicone has been substituted for oil, but nothing about the fuel system. So the question is are these trashed because of the CFC process?
1992 MJ Eliminator
Stroker in progress: Lunati Cam, Diamond Pistons, 4.0L Rods, 4wt Crankshaft 3727 Casting, Clifford Ceramic Coated Header,
99+ Intake, 62mm Throttle Body, 24# Ford Injectors
5-90
I made it to triple digits!
I made it to triple digits!
Posts: 163
Joined: February 19th, 2008, 9:16 pm
Location: Hammerspace
Contact:

Re: Injectors and CFC

Post by 5-90 »

They should not be - oil doesn't get anywhere near the fuel injectors unless something else is wrong.
Kelley's Works in Progress - http://www.kelleyswip.com
KWiP Parts Exchange - http://www.kelleyswip.com/exchange.html

"I don't think any of us will ever forget Louie. Ever since the explosion, there's been a little piece of him on all of us..."
Boilermaker
Donator
Donator
Posts: 29
Joined: February 13th, 2008, 5:47 pm

Re: Injectors and CFC

Post by Boilermaker »

Cool, thanks for the quick reply. I was optimistic when i pulled the first few injectors and fuel came out from the rails, but i wanted to make sure.
1992 MJ Eliminator
Stroker in progress: Lunati Cam, Diamond Pistons, 4.0L Rods, 4wt Crankshaft 3727 Casting, Clifford Ceramic Coated Header,
99+ Intake, 62mm Throttle Body, 24# Ford Injectors
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests