What SCR/DCR are you running?

Post by **laxplayermjd** » May 19th, 2009, 4:59 pm

Is there a DCR Calculator you would recommend? Ive just been using the one on this site for my calculations, havent entered my ivc angle in that one.

Post by **Muad'Dib** » May 19th, 2009, 7:02 pm

What wrong with using the one on this site? Its extremely accurate. It will also give you your IVC angle if you don't already know it.

Post by **mendelmax** » May 20th, 2009, 12:59 am

BTW, is there any possibility of making downloadable version of CR calculator? Not that I don't want to visit this site (which I do daily anyways

) but sometimes I have problems with internet access, and then I have to wait with my calculations

Post by **yuppiexj** » May 20th, 2009, 4:48 am

mendelmax wrote:BTW, is there any possibility of making downloadable version of CR calculator? Not that I don't want to visit this site (which I do daily anyways ) but sometimes I have problems with internet access, and then I have to wait with my calculations

You can save the page locally.

With the Firefox browser click File, Save page as.

It works, well but the Cam data pop ups don't save and you will need to get them separately.

Post by **mendelmax** » May 20th, 2009, 11:52 am

Thanks, never thought about that

I think I'm better in engines than computers

Post by **Muad'Dib** » May 20th, 2009, 1:31 pm

Another option is to use pkelleys... im not versed enough in C++ or Visual Basic to program it myself...

Its from this page:

http://www.empirenet.com/pkelley2/DynamicCR.html

Here is the direct download:

http://cochise.uia.net/pkelley2/dcrvb6.zip

Post by **SilverXJ** » May 21st, 2009, 3:55 pm

I'm running midgrade in my stroker now. Next step is to try regular. If it works on regular, I'll post up.

Post by **dwg86** » October 15th, 2009, 4:09 am

Stroker is installed and running. 9.25 SCR, 7.8 DCR, zero deck .043 head gasket. I just filled up with 87 octane...no pinging

Post by **gradon** » October 15th, 2009, 8:52 am

nice

Post by **ccpanel** » October 15th, 2009, 10:37 am

dwg86 wrote:Stroker is installed and running. 9.25 SCR, 7.8 DCR, zero deck .043 head gasket. I just filled up with 87 octane...no pinging

can you post your combo? piston, specs, anything you did to head/piston, cam... etc.
thanks!

Post by **dwg86** » October 15th, 2009, 11:05 am

ccpanel wrote:
dwg86 wrote:Stroker is installed and running. 9.25 SCR, 7.8 DCR, zero deck .043 head gasket. I just filled up with 87 octane...no pinging
can you post your combo? piston, specs, anything you did to head/piston, cam... etc.
thanks!

Link to my build. http://www.jeepstrokers.com/forum/viewt ... f=8&t=1004

What SCR/DCR are you running?

Re: What SCR/DCR are you running?

Re: What SCR/DCR are you running?

Re: What SCR/DCR are you running?

Re: What SCR/DCR are you running?

Re: What SCR/DCR are you running?

Re: What SCR/DCR are you running?

Re: What SCR/DCR are you running?

Re: What SCR/DCR are you running?

Re: What SCR/DCR are you running?

Re: What SCR/DCR are you running?

Re: What SCR/DCR are you running?

Who is online