Page 1 of 1

ECM gone bad

Posted: May 28th, 2019, 5:23 pm
by rurys
Hi guys , the name is Rury and I Owen a 2002 Jeep Tj 4.0stoked to 4.6 I am having electrical issues I am located in south west Cali any one know of any company that works on ecm rebuilding.thanks rurys@msn.com

Re: ECM gone bad

Posted: May 29th, 2019, 10:15 am
by SkylinesSuck
How sure are you it's the ecu? I thought mine was bad for a while but it turned out to be the harness.

Re: ECM gone bad

Posted: July 29th, 2019, 6:31 pm
by rurys
SkylinesSuck wrote:
May 29th, 2019, 10:15 am
How sure are you it's the ecu? I thought mine was bad for a while but it turned out to be the harness.
It turned out it was the eprom on the ecu had it fixed and reflashed put it back on and seemed like it wanted to turn on however it wouldn't seance the problem started with a broken cam sensor I remove the dsi shaft and the gears turned out strip replaced it with a new one and made sure the number one piston was at tdc and double check my timing marks and gave it a go and jeep turned on next step is a stroker cam any suggestions???

Re: ECM gone bad

Posted: July 29th, 2019, 6:33 pm
by rurys
26850216_10213652237236877_2058473232726825339_o.jpg

Re: ECM gone bad

Posted: July 29th, 2019, 6:34 pm
by rurys
now we good