Welcome to www.JeepStrokers.com!!
Not yet a registered user? You are required to Register before you can post within this topic.

05-06 Does CPS clocking matter???

For all non stroker / performance related problems and discussion.
Post Reply
Mike1080p
Posts: 1
Joined: October 6th, 2017, 11:58 am
Stroker Displacement: 4.6
Vehicle Year: 2006
Vehicle Make: Jeep
Vehicle Model: Wrangler

05-06 Does CPS clocking matter???

Post by Mike1080p » October 6th, 2017, 12:21 pm

Hello guys, new here trying to figure out way to get over this wall I’ve ran into. I have an 06 Wrangler and swapped out the 42rle auto trans for a 5spd ax-15. I know I can buy an adapter bellhousing, however I am seeking to attempt modifying the bellhousing myself first.
I know that the distance between the flywheel and sensor has to be exact. However I do not know if the clocking matters eg. (2O’clock vs 3O’Clock)

Thank anyone who can help in advance,
Mike :frustrated:

jsawduste
Strong Poster
Strong Poster
Posts: 969
Joined: February 28th, 2008, 3:13 am
Stroker Displacement: 4.9
Location: Michigan

Re: 05-06 Does CPS clocking matter???

Post by jsawduste » October 7th, 2017, 8:20 am

Clocking affects the crank signal to the ECM. IE crankshaft degrees of rotation to signal pulse.

Buy the bellhousing and be done with it.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests