can some one give me some details on machining this?
ive been reading alot on strokers and rebuilding, ive been trying my hardest to do research, by reading terminology, where people went wrong, where people went to fix that wrong.
so say i want to stroke my 4.0 to a 4.7, what are the specs that i should bring to the machinist?
oh and one other thing...
What makes a 4.0HO an HO? compared to a regular 4.0?
4.7 stroker
-
yuppiexj
- Donator
- Posts: 319
- Joined: February 13th, 2008, 7:31 pm
- Stroker Displacement: 4.5 needs assembly
- Location: Fredercksburg VA (land of nothing)
Re: 4.7 stroker
viewforum.php?f=27
The top two are required reading. (here they are for your convenience)
viewforum.php?f=36
viewforum.php?f=28
nutshell version rebuild the 4.0 using a AMC 258 crank (drops right in).
The top two are required reading. (here they are for your convenience)
viewforum.php?f=36
viewforum.php?f=28
nutshell version rebuild the 4.0 using a AMC 258 crank (drops right in).
TurboTom wrote:i will eat my words later if need be.
Proud owner of many stroker parts, that have not yet spontaneously assembled themselves.TurboTom wrote: Not sure of your rules...but you need to start with an engine that works best for the rules and cheat from there!
Who is online
Users browsing this forum: No registered users and 21 guests