4.0 roller cam options?

Post by **Plechtan** » March 5th, 2009, 11:39 am

They say they are a .904 chevy lifter for an aftermarket block.

Post by **Wrambler** » March 5th, 2009, 12:16 pm

Thanks, That explains the cost. That's like double what the Crane retrofits were running, IIRC.

Post by **Plechtan** » March 5th, 2009, 1:38 pm

Crowler may have a lifter with a removable tie bar.

Post by **amcinstaller** » March 9th, 2009, 4:34 pm

you couldnt even put a link in the advertisement??

had a look around, couldnt find it, only flat tappet, no roller cams. i also entered roller into the search box with no results. i did find this though:
http://shop.505performance.com/product. ... ductId=108
why no crank included in the stroker kit??

Post by **Wrambler** » March 9th, 2009, 6:21 pm

505performance wrote:THERE ARE COMPLETE KITS AVAILABLE KNOW FOR ROLLER CAMS LOOK AT 505PERFORMANCE.COM AS THEY HAVE THREE DIFFRENT ROLLER OPTIONS

I agree completely as to where is the information on this roller cam?
All we keep seeing is a vaque sales pitch. How about some actual product content? I have been to 505Performance.com THREE times now! I see NOTHING anywhere on that site about a roller cam.

Post by **Muad'Dib** » March 9th, 2009, 10:44 pm

Wrambler wrote:
505performance wrote:THERE ARE COMPLETE KITS AVAILABLE KNOW FOR ROLLER CAMS LOOK AT 505PERFORMANCE.COM AS THEY HAVE THREE DIFFRENT ROLLER OPTIONS
I agree completely as to where is the information on this roller cam?
All we keep seeing is a vaque sales pitch. How about some actual product content? I have been to 505Performance.com THREE times now! I see NOTHING anywhere on that site about a roller cam.

The user was asked to make a detailed post in the classifieds section. If the user continues to post "spam" as i would prefer to call it, they will be removed from this forum.

Please see the following thread for more information about 505:

viewtopic.php?f=9&t=750

Thanks

Post by **Gary Grand** » March 11th, 2009, 12:14 am

amcinstaller wrote:you couldnt even put a link in the advertisement??

had a look around, couldnt find it, only flat tappet, no roller cams. i also entered roller into the search box with no results. i did find this though:
http://shop.505performance.com/product. ... ductId=108
why no crank included in the stroker kit??

That´s new?
http://shop.505performance.com/product. ... ductId=178
Sounds good, but I´d still like to have some more info...

Post by **Flash** » March 11th, 2009, 5:26 pm

Gary Grand wrote:
amcinstaller wrote:you couldnt even put a link in the advertisement??

had a look around, couldnt find it, only flat tappet, no roller cams. i also entered roller into the search box with no results. i did find this though:
http://shop.505performance.com/product. ... ductId=108
why no crank included in the stroker kit??
That´s new?
http://shop.505performance.com/product. ... ductId=178
Sounds good, but I´d still like to have some more info...

AS we are all, several here have invited him/them over to discuss the inner details not just the price tag..............I my self have invited him to a specific post...............But haven't even got a e- mail return sence then............

Flash

4.0 roller cam options?

Re: 4.0 roller cam options?

Re: 4.0 roller cam options?

Re: 4.0 roller cam options?

Re: 4.0 roller cam options?

Re: 4.0 roller cam options?

Re: 4.0 roller cam options?

Re: 4.0 roller cam options?

Re: 4.0 roller cam options?

Who is online