Block #

Newbies, and basic Stroker Recipes... Get started with your first stroker here!!
Post Reply
NvrGrwUp
Posts: 5
Joined: January 23rd, 2009, 4:04 pm

Block #

Post by NvrGrwUp »

I just pulled an I6 out with the number of EF8933002665 BT on the divers side and 706M23 under 2 and 3 plugs.

Need a little help with the ID on this one
yuppiexj
Donator
Donator
Posts: 319
Joined: February 13th, 2008, 7:31 pm
Stroker Displacement: 4.5 needs assembly
Location: Fredercksburg VA (land of nothing)

Re: Block #

Post by yuppiexj »

That's a Renix
it was cast June 26, 1987

see here for more info
viewtopic.php?f=27&t=52

and

http://www.geocities.com/cantwait_forvi ... mbers.html
TurboTom wrote:i will eat my words later if need be.
TurboTom wrote: Not sure of your rules...but you need to start with an engine that works best for the rules and cheat from there!
Proud owner of many stroker parts, that have not yet spontaneously assembled themselves.
NvrGrwUp
Posts: 5
Joined: January 23rd, 2009, 4:04 pm

Re: Block #

Post by NvrGrwUp »

Thank you!

This is what I am going to build my stroker out of. Getting ready to tear this one down and see what is in side as long as there is nothing to bad it will see the doc.
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 7 guests