Ft450 on 4.7 Stroker

[lcolina]

Hi Guys.

I have a FT450 that I am configuring in a Jeep 242 4.7 engine with Coilrack and OEM Crank and Cam Sensor

I cant find information on the specific setup of the Crank and Cam sensor in the FT Manager.

I just need to know what specs should I use in the configuration. Would it be possible for you to point me in the right direction?

Thanks,

Leo.

[Randy Bobandi]

I have a FT450

I cant find information on the specific setup of the Crank and Cam sensor in the FT Manager.

For the crank signal, I don't think FuelTech has the OE Jeep crank pattern preconfigured. Best options are; install a trigger wheel, modify the damper or buy an already modified damper.

For the Cam Sync, the OE unit should work just fine as a half moon, hall effect, falling edge.

triggerwheel.jpg

[lcolina]

Understood. Thank you!