Jeep Strokers

Posted: **October 13th, 2022, 8:46 pm**

Hey all,

I've browsed through the chats but am still not clear if my situation is correct. I'm running a 3727 crank in an '01 block with what I assumed were stock 4.0L rods. Is this normal to be around 1/4" off piston to deck height at TDC?

Posted: **October 15th, 2022, 6:05 pm**

Absolutely not! You shouldn't be more than -0.035" or so at the most. Looks like you either got pistons spec'd for the wrong rods, or the wrong rods for the pistons. What a shame!

Posted: **October 16th, 2022, 11:35 pm**

SNUBBERMIKE wrote: ↑October 13th, 2022, 8:46 pm Hey all,

I've browsed through the chats but am still not clear if my situation is correct. I'm running a 3727 crank in an '01 block with what I assumed were stock 4.0L rods. Is this normal to be around 1/4" off piston to deck height at TDC?

It sounds like you have the 1/4" shorter 4.2L connecting rods by mistake.

Jeep Strokers

Piston to deck height

Piston to deck height

Re: Piston to deck height

Re: Piston to deck height