Page 1 of 1
gearing for stroker
Posted: August 28th, 2022, 12:15 am
by Andre_ITALY
Hi, I'm currently 35 " km3 with 4.86 crown and pinion (currie 9 ") in my Tj 1997 m / t. With a basic stroker I could use 4.10, to improve comfort on the highway at around 80mph? or in the mountains and off-road will it be worse than now with 4.0? thank you
Re: gearing for stroker
Posted: August 28th, 2022, 12:26 am
by Cheromaniac
With a combination of a torquey 4.6 stroker and 35" tires, the 4.10 axle gears would be just about right.
Re: gearing for stroker
Posted: August 29th, 2022, 2:59 pm
by Brianj5600
Andre_ITALY wrote: ↑August 28th, 2022, 12:15 am
Hi, I'm currently 35 " km3 with 4.86 crown and pinion (currie 9 ") in my Tj 1997 m / t. With a basic stroker I could use 4.10, to improve comfort on the highway at around 80mph? or in the mountains and off-road will it be worse than now with 4.0? thank you
This is a good gear calculator for picking gears.
http://www.grimmjeeper.com/gears.html