4.7 swap
-
- Posts: 3
- Joined: May 4th, 2021, 6:31 pm
- Stroker Displacement: 4.7
- Vehicle Year: 1992
- Vehicle Make: Cherokee
- Vehicle Model: Laredo
4.7 swap
I usually stuff a ls in everything but decided to keep the 6 in my crawler. I have a built 4.7. I have a 92 Cherokee is that tunable? what injectors should I use? and what's a good header and pipe kit I can use for it?
- Cheromaniac
- I live here
- Posts: 3192
- Joined: March 8th, 2008, 12:58 pm
- Stroker Displacement: 4563cc
- Vehicle Year: 1992
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Cyprus
- Contact:
Re: 4.7 swap
My '92 XJ ran great with the stock PCM. Just swap in bigger injectors (mine had blue Ford injectors rated to 24lb/hr @ 39psi).
You could use a cheapish eBay header. Just make sure the exhaust system downstream is at least 2.5" in diameter. Also use a throttle body with a bore of at least 62mm.
You could use a cheapish eBay header. Just make sure the exhaust system downstream is at least 2.5" in diameter. Also use a throttle body with a bore of at least 62mm.
1992 XJ 4.6 I6 - 5MT - Stroker build-up, Stroker "recipes" Sold
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car
-
- Posts: 3
- Joined: May 4th, 2021, 6:31 pm
- Stroker Displacement: 4.7
- Vehicle Year: 1992
- Vehicle Make: Cherokee
- Vehicle Model: Laredo
Re: 4.7 swap
would it make a difference if I put a wire harness and pcm in out of a 98 and can I ditch the stock instrument cluster and hook the wires up to auto meter guages?
Who is online
Users browsing this forum: No registered users and 1 guest