Jeep Strokers

Are there any gauges or sensors that can be added to the engine that would be worthwhile to monitor the motor?

I'd added an engine oil temperature gauge plus an air/fuel ratio gauge that ran off an O2 sensor that I had placed in the header collector.

http://www.angelfire.com/my/fan/oiltemp.html

Oil temp and Air fuel ratio would be the first 2. After that I would do a redundant oil pressure gauge and a transmission temp if you have an auto.

Okay, that goes along with my research.

Any suggested brands or placements?

These are what I'm thinking:

Oil Temp- AutoMeter 9240
https://www.summitracing.com/parts/atm-9240

Wideband- AEM Electronics 30-0334 - AEM Electronics X-Series Wideband UEGO Air/Fuel Sensor Controller Gauges
https://www.summitracing.com/parts/avm-30-0334

Aeromotive Fuel Pressure Gauges 15633
https://www.summitracing.com/parts/aei-15633
-this I will connect to a gauge port on my regulator

Does anyone have experience with these?

I am also looking for an a / f meter for my 97 TJ!

https://www.aemelectronics.com/products ... uego-OBDII

or

https://www.aemelectronics.com/products ... ller-gauge

What advantages do I have with 30-0334 (obd2) ?

An EGT gauge is a waste of money on n/a application?

THANKS!