More Gauges/Sensors
-
- Making Progress
- Posts: 57
- Joined: July 31st, 2020, 2:45 pm
- Vehicle Year: 1990
- Vehicle Make: Jeep
- Vehicle Model: YJ
More Gauges/Sensors
Are there any gauges or sensors that can be added to the engine that would be worthwhile to monitor the motor?
- Cheromaniac
- I live here
- Posts: 3190
- Joined: March 8th, 2008, 12:58 pm
- Stroker Displacement: 4563cc
- Vehicle Year: 1992
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Cyprus
- Contact:
Re: More Gauges/Sensors
I'd added an engine oil temperature gauge plus an air/fuel ratio gauge that ran off an O2 sensor that I had placed in the header collector.You do not have the required permissions to view the files attached to this post.
- SilverXJ
- Global Moderator
- Posts: 5790
- Joined: February 14th, 2008, 7:14 am
- Stroker Displacement: 4.6L
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Radford, Va
Re: More Gauges/Sensors
Oil temp and Air fuel ratio would be the first 2. After that I would do a redundant oil pressure gauge and a transmission temp if you have an auto.
2000 XJ. 4.6L stroker
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
-
- Making Progress
- Posts: 57
- Joined: July 31st, 2020, 2:45 pm
- Vehicle Year: 1990
- Vehicle Make: Jeep
- Vehicle Model: YJ
Re: More Gauges/Sensors
Okay, that goes along with my research.
-
- Making Progress
- Posts: 57
- Joined: July 31st, 2020, 2:45 pm
- Vehicle Year: 1990
- Vehicle Make: Jeep
- Vehicle Model: YJ
Re: More Gauges/Sensors
Any suggested brands or placements?
-
- Making Progress
- Posts: 57
- Joined: July 31st, 2020, 2:45 pm
- Vehicle Year: 1990
- Vehicle Make: Jeep
- Vehicle Model: YJ
Re: More Gauges/Sensors
These are what I'm thinking:
Oil Temp- AutoMeter 9240
https://www.summitracing.com/parts/atm-9240
Wideband- AEM Electronics 30-0334 - AEM Electronics X-Series Wideband UEGO Air/Fuel Sensor Controller Gauges
https://www.summitracing.com/parts/avm-30-0334
Aeromotive Fuel Pressure Gauges 15633
https://www.summitracing.com/parts/aei-15633
-this I will connect to a gauge port on my regulator
Does anyone have experience with these?
Oil Temp- AutoMeter 9240
https://www.summitracing.com/parts/atm-9240
Wideband- AEM Electronics 30-0334 - AEM Electronics X-Series Wideband UEGO Air/Fuel Sensor Controller Gauges
https://www.summitracing.com/parts/avm-30-0334
Aeromotive Fuel Pressure Gauges 15633
https://www.summitracing.com/parts/aei-15633
-this I will connect to a gauge port on my regulator
Does anyone have experience with these?
-
- Learning to use the board
- Posts: 36
- Joined: January 7th, 2016, 9:31 am
- Vehicle Year: 1997
- Vehicle Make: Jeep
- Vehicle Model: TJ 4.0
- Location: Bologna, ITALY
Re: More Gauges/Sensors
I am also looking for an a / f meter for my 97 TJ!
https://www.aemelectronics.com/products ... uego-OBDII
or
https://www.aemelectronics.com/products ... ller-gauge
What advantages do I have with 30-0334 (obd2) ?
An EGT gauge is a waste of money on n/a application?
THANKS!
https://www.aemelectronics.com/products ... uego-OBDII
or
https://www.aemelectronics.com/products ... ller-gauge
What advantages do I have with 30-0334 (obd2) ?
An EGT gauge is a waste of money on n/a application?
THANKS!
Who is online
Users browsing this forum: Ahrefs [Bot] and 29 guests