Welcome to www.JeepStrokers.com!!
Not yet a registered user? You are required to Register before you can post within this topic.

Jeep Cherokee XJ SRT6 Build

Project vehicle blogs or "mod diary" specific threads only.. Pics encouraged!!
Cummins90
I made it to triple digits!
I made it to triple digits!
Posts: 144
Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee

Jeep Cherokee XJ SRT6 Build

Post by Cummins90 » March 29th, 2020, 8:50 am

Hey I have this build in a couple forums and at some point it will get a stroker motor so why not here as well. It would have been cool to see team viper/pvo pick up the idea of a performance package for the late 90s early 2000 cherokee. Sadly they didn't but this is how I would have liked to see it done.

...



...

Cummins90
I made it to triple digits!
I made it to triple digits!
Posts: 144
Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: Jeep Cherokee XJ SRT6 Build

Post by Cummins90 » March 29th, 2020, 12:29 pm

Started with a very stock XJ.
You do not have the required permissions to view the files attached to this post.

Cummins90
I made it to triple digits!
I made it to triple digits!
Posts: 144
Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: Jeep Cherokee XJ SRT6 Build

Post by Cummins90 » March 30th, 2020, 4:34 am

Remove the intake and exhaust. Pull the block coolant plug.
You do not have the required permissions to view the files attached to this post.

Cummins90
I made it to triple digits!
I made it to triple digits!
Posts: 144
Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: Jeep Cherokee XJ SRT6 Build

Post by Cummins90 » March 30th, 2020, 5:25 am

Oil drain and oil feed.
You do not have the required permissions to view the files attached to this post.

Cummins90
I made it to triple digits!
I made it to triple digits!
Posts: 144
Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: Jeep Cherokee XJ SRT6 Build

Post by Cummins90 » March 30th, 2020, 6:54 am

Prep the turbo to manifold.
You do not have the required permissions to view the files attached to this post.

Cummins90
I made it to triple digits!
I made it to triple digits!
Posts: 144
Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: Jeep Cherokee XJ SRT6 Build

Post by Cummins90 » March 30th, 2020, 7:21 am

Hook up the block coolant feed to the lower port on the turbo. The upper coolant will loop over to the heater core inlet. Tip the manifold runner number 1 up and attach the downpipe. Pull it back into position and thread the oil drain into the pan.
You do not have the required permissions to view the files attached to this post.

Cummins90
I made it to triple digits!
I made it to triple digits!
Posts: 144
Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: Jeep Cherokee XJ SRT6 Build

Post by Cummins90 » March 30th, 2020, 10:33 am

Install your narrow and wideband sensors. Install the oil feed line on the turbo and run it up through the intake manifold as you install it.
You do not have the required permissions to view the files attached to this post.

Cummins90
I made it to triple digits!
I made it to triple digits!
Posts: 144
Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: Jeep Cherokee XJ SRT6 Build

Post by Cummins90 » March 30th, 2020, 11:21 am

Install your charge pipes and intercooler. I cut my bumper and put it there. I installed champion spark plugs from an 88 XJ. Run your vac lines and boost ref lines.
You do not have the required permissions to view the files attached to this post.

Cummins90
I made it to triple digits!
I made it to triple digits!
Posts: 144
Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: Jeep Cherokee XJ SRT6 Build

Post by Cummins90 » March 30th, 2020, 12:53 pm

Here is the engine bay all together. Gauges are in. Boost, AFR and trans temp.
You do not have the required permissions to view the files attached to this post.

User avatar
SkylinesSuck
Donator
Donator
Posts: 552
Joined: February 14th, 2009, 11:11 pm
Stroker Displacement: 4.6L
Vehicle Year: 1998
Vehicle Make: Jeep
Vehicle Model: Wrangler
Location: Northern VA

Re: Jeep Cherokee XJ SRT6 Build

Post by SkylinesSuck » March 30th, 2020, 1:30 pm

Really enjoying this thread. Moar!! :banana:

Cummins90
I made it to triple digits!
I made it to triple digits!
Posts: 144
Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: Jeep Cherokee XJ SRT6 Build

Post by Cummins90 » March 30th, 2020, 6:26 pm

SkylinesSuck wrote:
March 30th, 2020, 1:30 pm
Really enjoying this thread. Moar!! :banana:
I have more install tech stuff on the way. What else you want to see?

TJryder
Making Progress
Making Progress
Posts: 72
Joined: July 29th, 2018, 1:03 pm
Stroker Displacement: 4.6
Vehicle Year: 2000
Vehicle Make: Jeep
Vehicle Model: TJ

Re: Jeep Cherokee XJ SRT6 Build

Post by TJryder » April 6th, 2020, 7:45 am

Cummins90 wrote:
March 30th, 2020, 6:26 pm
SkylinesSuck wrote:
March 30th, 2020, 1:30 pm
Really enjoying this thread. Moar!! :banana:
I have more install tech stuff on the way. What else you want to see?
Everything!

:D
°O|||||||O°

Tolemar
Making Progress
Making Progress
Posts: 79
Joined: October 28th, 2019, 4:55 pm
Stroker Displacement: 4.6
Vehicle Year: 1997
Vehicle Make: Jeep
Vehicle Model: Wrangler

Re: Jeep Cherokee XJ SRT6 Build

Post by Tolemar » May 19th, 2020, 8:51 am

:cheers:
Last edited by Tolemar on May 19th, 2020, 8:56 am, edited 1 time in total.

Tolemar
Making Progress
Making Progress
Posts: 79
Joined: October 28th, 2019, 4:55 pm
Stroker Displacement: 4.6
Vehicle Year: 1997
Vehicle Make: Jeep
Vehicle Model: Wrangler

Re: Jeep Cherokee XJ SRT6 Build

Post by Tolemar » May 19th, 2020, 8:55 am

Nice! is that your new cast turbo exaust manifold? How are you supplying the extra fueling and retarding the timing curve if it needs it. Hows it run and how much boost? Are you tuning the jtec computer yet?

Cummins90
I made it to triple digits!
I made it to triple digits!
Posts: 144
Joined: May 14th, 2016, 10:29 am
Vehicle Year: 1996
Vehicle Make: Jeep
Vehicle Model: Cherokee

Re: Jeep Cherokee XJ SRT6 Build

Post by Cummins90 » May 19th, 2020, 6:59 pm

The manifold is mild steel welded together on a fixture, I have a bunch of them. I use an aem FIC but also have HP as well. Just havent had any free time lately due to the Cov.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests