oil filter without bypass for break in

Swaping 258 to 4.0, 4.0 parts to 258 etc!
Post Reply
BeRadicle
I think I'll order a "tab"
I think I'll order a "tab"
Posts: 40
Joined: October 2nd, 2014, 8:50 am
Vehicle Year: 1992
Vehicle Make: JEEP
Vehicle Model: Grand YJ

oil filter without bypass for break in

Post by BeRadicle »

by pass less oil filter for break in sessions? any guys run one? or do you just let the motor self clearance till you have less than 60psi oil pressure.?
User avatar
IH 392
I love JeepStrokers.com!!
I love JeepStrokers.com!!
Posts: 725
Joined: October 4th, 2008, 11:15 am
Location: Eugene ORYGUN
Contact:

Re: oil filter without bypass for break in

Post by IH 392 »

Ever see the MESS when an oil filter explodes!??
You can get more power out of ANY engine!!!
ASE Master certified engine machinist, gas and diesel
BeRadicle
I think I'll order a "tab"
I think I'll order a "tab"
Posts: 40
Joined: October 2nd, 2014, 8:50 am
Vehicle Year: 1992
Vehicle Make: JEEP
Vehicle Model: Grand YJ

Re: oil filter without bypass for break in

Post by BeRadicle »

no, no I have not, I understand they can't withstand 150psi but they should be fine at 80psi. I just want to filter the oil while I break in the motor not feed the motor unfiltered oil that could potentially carry particulate into the bearings.
astjp2
I think I'll order a "tab"
I think I'll order a "tab"
Posts: 45
Joined: September 11th, 2008, 8:50 am
Stroker Displacement: 4.7
Vehicle Year: 1994
Vehicle Make: Jeep
Vehicle Model: Wrangler

Re: oil filter without bypass for break in

Post by astjp2 »

I would be more worried about wiping a cam lobe than your oil filter, there have been probably 100 million engines broke in in the last 20 years with standard oil filters, If your engine is built right, it will not be a problem. Now for your cam problems you may encounter...
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests