Currently have scat rotating assembly with 4” pistons on nitrous race 100yds in sand in 4lo with 3.07 gearing
Been told by a few people if i switch to the 12 cwt crank would run a little faster wondering if thats true?
Stroker cranks
-
- Noob
- Posts: 13
- Joined: May 3rd, 2013, 8:09 pm
- Stroker Displacement: 4.7
- Vehicle Year: 1988
- Vehicle Make: jeep
- Vehicle Model: comanche
- IH 392
- I love JeepStrokers.com!!
- Posts: 725
- Joined: October 4th, 2008, 11:15 am
- Location: Eugene ORYGUN
- Contact:
Re: Stroker cranks
A "PROPERLY" balanced reciprocating assembly is most of the key, a 12 CW crank has better harmonics, I don't think its ever been proven either way??
There was a dingle berry on here some time ago that was SO! convinced that a 4 CW crank made more HP that he was going to use on in his rock crawling rig!??, a drag racer guy once told me that he used a 40# flywheel and got quicker ET's??
On our circle burners we go as light as possible, but we speed up and slow down as quick as possible twice each lap for 50+ laps.
There was a dingle berry on here some time ago that was SO! convinced that a 4 CW crank made more HP that he was going to use on in his rock crawling rig!??, a drag racer guy once told me that he used a 40# flywheel and got quicker ET's??
On our circle burners we go as light as possible, but we speed up and slow down as quick as possible twice each lap for 50+ laps.
You can get more power out of ANY engine!!!
ASE Master certified engine machinist, gas and diesel
ASE Master certified engine machinist, gas and diesel
-
- Noob
- Posts: 13
- Joined: May 3rd, 2013, 8:09 pm
- Stroker Displacement: 4.7
- Vehicle Year: 1988
- Vehicle Make: jeep
- Vehicle Model: comanche
Re: Stroker cranks
Im kinda lost sorry for my ignorance should i even try the 12 cw?
-
- Strong Poster
- Posts: 896
- Joined: August 15th, 2009, 1:27 am
- Stroker Displacement: 4.7
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
Re: Stroker cranks
The short answer is yes.aguiar_racer wrote: ↑July 14th, 2018, 11:04 pm Im kinda lost sorry for my ignorance should i even try the 12 cw?
If I had greater access or ability to obtain, 90% of my builds would utilize a 12cwt
-
- Noob
- Posts: 13
- Joined: May 3rd, 2013, 8:09 pm
- Stroker Displacement: 4.7
- Vehicle Year: 1988
- Vehicle Make: jeep
- Vehicle Model: comanche
Re: Stroker cranks
Thanks alot Ross for ur help
Who is online
Users browsing this forum: Ahrefs [Bot], Semrush [Bot] and 30 guests