Help with a 4.6 Recipe
Posted: March 17th, 2018, 9:48 am
I’ve got a 97 ZJ with 4.0. Going to stroke it.
the crank , Bosch 703 injectors,new head on order.
I’m wanting to shoot for 4.6 and run on 87 octane fuel.
I’m looking at the Comp Cams 68-232-4 camshaft
I’ve heard mixed opinions on the valve springs from Mopar performance, locks, retainers.
Also have no idea what rods/ rod size to use.
I will be using a mopar performance head gasket that I believe was at .043 compressed.
the crank , Bosch 703 injectors,new head on order.
I’m wanting to shoot for 4.6 and run on 87 octane fuel.
I’m looking at the Comp Cams 68-232-4 camshaft
I’ve heard mixed opinions on the valve springs from Mopar performance, locks, retainers.
Also have no idea what rods/ rod size to use.
I will be using a mopar performance head gasket that I believe was at .043 compressed.